腹主动脉瘤壁钙化与腔内血栓对破裂预测的影响
研究对18例开放手术患者的40个前壁和114个腔内血栓样本进行力学测试与电镜观察,发现瘤径与壁力学特性无显著相关,钙化使周围组织峰值应变平均增加174%,峰值应力增加18.2%,四种血栓类型与不同刚度相关。
要点
- 瘤径与壁柯西应力或刚度无显著相关。
- 钙化使周围组织峰值应变平均增加174%。
- 四种腔内血栓类型对应不同力学刚度。
核心结论
- 腹主动脉瘤壁刚度由非钙化组织的承载能力决定,低刚度代表高度退化的脆弱壁。
- 与内壁相连的钙化导致周围组织严重过度拉伸。
- 额外的生物力学指标可能有助于提高破裂预测准确性。
研究设计与样本
- 从18例开放手术患者获取40个前壁和114个腔内血栓样本。
- 采用控制周向拉伸试验结合散斑应变追踪技术量化变形空间异质性和局部应变。
- 力学测试后用电子显微镜检查壁和血栓的微观结构特征。
主要发现
- 瘤径与壁柯西应力无显著相关(rs = -0.139;P = .596)。
- 瘤径与壁刚度无显著相关(rs = -0.451;P = .069)。
- 钙化使周围组织峰值应变平均增加174%,峰值应力增加18.2%。
- 四种腔内血栓类型与血栓及 underlying 腹主动脉瘤壁的不同力学刚度直接相关。
- 血栓类型与几何因素无关:血栓刚度与瘤径(rs = -0.511;P = .074)、血栓刚度与血栓体积(rs = -0.245;P = .467)。
临床怎么用
- 评估破裂风险时除瘤径外可考虑壁钙化和血栓的力学结构特征。
- 关注与内壁相连钙化周围组织的过度拉伸区域。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: Parameters other than maximum diameter that predict rupture of abdominal aortic aneurysms (AAAs) may be helpful for risk-benefit analysis in individual patients. The aim of this study was to characterize the biomechanical-structural characteristics associated with AAA walls to better identify the related mechanistic variables required for an accurate prediction of rupture risk. METHODS: Anterior AAA wall (n = 40) and intraluminal thrombus (ILT; n = 114) samples were acquired from 18 patients undergoing open surgical repair. Biomechanical characterization was performed using controlled circumferential stretching tests combined with a speckle-strain tracking technique to quantify the spatial heterogeneity in deformation and localized strains in the AAA walls containing calcification. After mechanical testing, the accompanying microstructural characteristics of the AAA wall and ILT types were examined using electron microscopy. RESULTS: No significant correlation was found between the AAA diameter and the wall mechanical properties in terms of Cauchy stress (rs = -0.139; P = .596) or stiffness (rs = -0.451; P = .069). Quantification of significant localized peak strains, which were concentrated in the tissue regions surrounding calcification, reveals that peak strains increased by a mean of 174% as a result of calcification and corresponding peak stresses by 18.2%. Four ILT types characteristic of diverse stages in the evolving tissue microstructure were directly associated with distinct mechanical stiffness properties of the ILT and underlying AAA wall. ILT types were independent of geometric factors, including ILT volume and AAA diameter measures (ILT stiffness and AAA diameter [rs = -0.511; P = .074]; ILT stiffness and ILT volume [rs = -0.245; P = .467]). CONCLUSIONS: AAA wall stiffness properties are controlled by the load-bearing capacity of the noncalcified tissue portion, and low stiffness properties represent a highly degraded vulnerable wall. The presence of calcification that is contiguous with the inner wall causes severe tissue overstretching in surrounding tissue areas. The results highlight the use of additional biomechanical measures, detailing the biomechanical-structural characteristics of AAA tissue, that may be a helpful adjunct to improve the accuracy of rupture prediction.
引用
- Barrett HE, Cunnane EM, Hidayat H, et al. On the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture. J Vasc Surg. 2017. PMID: 28899569. doi:10.1016/j.jvs.2017.05.086
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。