大鼠动脉瘤-内漏模型的构建及其用于EVAR瘤囊填充材料研究
本研究通过手术诱导大鼠髂动脉壁扩张损伤并保留髂内动脉作为瘤囊侧支,建立持续性II型内漏动脉瘤模型。20只大鼠中15只模型鼠存活至1、2、4周,瘤径显著增大且组织学显示弹性纤维断裂加重,瘤囊内压力持续稳定,证实模型可模拟持续性内漏。
要点
- 成功构建大鼠IIa型内漏动脉瘤模型,瘤囊内压力持续稳定4周。
- 模型组瘤径显著大于假手术组,4周时弹性纤维断裂明显加重。
- 该模型为评估EVAR瘤囊填充材料提供可重复的实验平台。
核心结论
- 成功开发了一种新型IIa型内漏动脉瘤模型,为EVAR研究和瘤囊填充材料开发提供实验平台。
研究设计与样本
- 研究采用大鼠模型,手术诱导髂总动脉和髂外动脉壁扩张损伤,保留髂内动脉作为瘤囊单一侧支。
- 共20只大鼠分为四组,其中15只模型鼠存活至1、2、4周。
- 定期测量瘤囊直径,进行组织学分析评估瘤壁结构完整性,并监测全身及瘤囊内血压和心率以确认内漏。
主要发现
- 模型组动脉瘤直径较假手术组显著增加(P < .05),且随时间保持稳定。
- 组织学分析显示4周时弹性纤维断裂加重(3.600 ± 0.547 vs. 1.200 ± 0.447;P < .001)。
- 通过动脉血抽吸和动脉波形检测确认内漏存在。
- 瘤囊内平均压力为28.2 ± 5.4 mm Hg(占全身平均动脉压的28.7 ± 4.9%),脉压为15.4 ± 6.9 mm Hg。
- 4周内未观察到压力下降,表明内漏持续且稳定。
临床怎么用
- 该模型可用于评估和优化EVAR术后瘤囊填充材料,以改善内漏的预防和管理。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: To develop a novel arterial aneurysm model that replicates sustained endoleak flow while also preserving a biologically active environment within the aneurysm sac. This model serves as a platform for assessing and refining aneurysm sac-filling materials aimed at improving the prevention and management of endoleaks following endovascular aneurysm repair. METHODS: To create an aneurysm model, this study involved the surgical induction of vessel wall dilation and damage in the common iliac artery and external iliac artery of rats. Subsequently, the internal iliac artery was retained as a single collateral vessel of the aneurysm sac. Retrograde branch flow from the internal iliac artery contributed to the pressurization of the aortic aneurysm sac and continued expansion of the aneurysm. This approach established type II endoleak models. Aneurysm sac diameter was measured regularly to monitor model progression dynamically. Histological analysis was employed to assess the structural integrity of the aneurysm walls. Furthermore, both systemic and intra-aneurysmal blood pressure and heart rate in rats were monitored to ascertain the presence of endoleaks. RESULTS: Twenty rats were allocated into four groups, with 15 model rats surviving to 1, 2, and 4 weeks. Aneurysm diameter in the model groups significantly increased compared to that in the sham group (P < .05) and remained stable over time. Histological analysis showed greater elastic fiber fragmentation at 4 weeks (3.600 ± 0.547 vs. 1.200 ± 0.447; P < .001). Endoleaks were confirmed through arterial blood aspiration and arterial waveform detection. Intra-sac pressure averaged 28.2 ± 5.4 mm Hg (28.7 ± 4.9% of systemic mean arterial pressure), with pulse pressure recorded at 15.4 ± 6.9 mm Hg. No pressure decline was observed over 4 weeks, indicating persistent, stable endoleaks. CONCLUSIONS: This research successfully developed a novel type IIa endoleak aneurysm model, providing a robust experimental platform for the advancement of EVAR studies and the development of sac-filling materials.Clinical ImpactThis study presents an innovative aneurysm model that effectively simulates a bioactive environment within the aneurysm sac and exhibits the characteristics of Type II endoleaks, responding to the pressing demand for appropriate models aimed at evaluating aneurysm sac-filling methodologies. By employing in situ arterial mechanical injury along with dilation techniques, this model facilitates a straightforward, swift, and highly reproducible method for creating an active aneurysm wall. Furthermore, it reproduces a persistent Type II endoleak through the internal iliac artery, thereby authentically mirroring the hemodynamic conditions seen in patients. In this way, this advancement equips clinicians with an essential resource for exploring novel materials and techniques, which could enhance patient outcomes in endovascular aneurysm repair interventions.
引用
- Fan JF, Chai KJ, Zhang H, et al. Development of a Rat Arterial Aneurysm-Endoleak Model for EVAR Sac Filling Material Research. J Endovasc Ther. 2026. PMID: 42289853. doi:10.1177/15266028261454345
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。