开窗腔内主动脉修复术中Viabahn VBX桥接支架的三维几何分析:多中心回顾性队列研究
本研究为多中心回顾性队列研究,纳入2018至2022年间3个血管中心接受开窗腔内主动脉修复术(FEVAR)并使用Viabahn VBX球囊扩张覆膜支架(BECS)治疗至少一条内脏动脉、且有两次术后CTA(FU1:0-6个月;FU2:9-24个月)的患者,分析90枚VBX BECS的喇叭口几何形态。结果显示随访14个月内喇叭口几何形态无显著变化,但喇叭口角度从31°±15°变为33°±16°(p=.009)。作者认为三维几何分析可能有助于识别内漏和闭塞的来源,但需更大样本研究确认。
要点
- 随访14个月内VBX桥接支架喇叭口几何形态无显著变化。
- 喇叭口角度从FU1的31°±15°变为FU2的33°±16°(p=.009)。
- 作者认为三维几何分析可能有助于识别内漏和闭塞的来源,但需更大样本研究确认。
核心结论
- VBX桥接支架的喇叭口几何形态在14个月随访期间无显著变化。
- 三维几何分析可能有助于识别内漏和闭塞的来源,但需更大样本研究包含足够患者和BECS以比较复杂与不复杂病例来确认。
研究设计与样本
- 多中心回顾性队列研究,纳入2018至2022年间参与VBX Expand Registry的3个血管中心接受FEVAR的患者。
- 纳入标准为至少一条内脏动脉使用VBX治疗且有两次术后CTA扫描(FU1:0-6个月;FU2:9-24个月)。
- 共分析43例FEVAR患者的90枚VBX BECS。
主要发现
- FU1的中位CTA随访时间为35天(IQR 29-51天),FU2为14个月(IQR 13-15个月)。
- 喇叭口至开窗距离在FU1为5.6±2.0 mm,FU2为5.7±2.0 mm(p=.417)。
- 喇叭口至开窗直径比在FU1为1.19±0.17,FU2为1.21±0.19(p=.206)。
- 平均贴壁长度在FU1为18.6±5.3 mm,FU2为18.6±5.3 mm(p=.550)。
- 喇叭口角度在FU1为31°±15°,FU2为33°±16°(p=.009)。
临床怎么用
- 作者认为喇叭口的三维几何分析可能有助于识别内漏和闭塞的来源,但需更大样本研究确认。
局限性
- 作者指出需更大样本研究包含足够患者和BECS以比较复杂与不复杂病例来确认几何分析的作用。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: The primary aim of this study was to assess the 3-dimensional flare geometry of the Gore Viabahn VBX balloon-expandable covered stent (BECS) after fenestrated endovascular aortic repair (FEVAR) and to determine and visualize BECS-associated complications. METHODS: This multicenter retrospective study included patients who underwent FEVAR between 2018 and 2022 in 3 vascular centers participating in the VBX Expand Registry. Patients with at least one visceral artery treated with the VBX and with availability of 2 post-FEVAR computed tomography angiography (CTA) scans (follow-up [FU] 1: 0-6 months; FU2: 9-24 months) were included. The flare geometry of the VBX, including flare-to-fenestration distance, flare-to-fenestration diameter ratio, flare angle, and apposition with the target artery were assessed using a vascular workstation and dedicated CTA applied software. RESULTS: In total, 90 VBX BECS were analyzed in 43 FEVAR patients. The median CTA FU for FU1 and FU2 was 35 days (interquartile range [IQR], 29-51 days) and 14 months (IQR, 13-15 months), respectively. The mean flare-to-fenestration distance was 5.6±2.0 mm on FU1 and remained unchanged at 5.7±2.0 mm on FU2 (p=.417). The flare-to-fenestration diameter ratio was 1.19±0.17 on FU1 and remained unchanged at 1.21±0.19 (p=.206). The mean apposition length was 18.6±5.3 mm on FU1 and remained 18.6±5.3 mm (p=.550). The flare angle was 31°±15° on FU1 and changed to 33°±16° (p=.009). On FU1, the BECS-associated complication rate was 1%, and the BECS-associated reintervention rate was 0%. On FU2, the BECS-associated complication rate was 3%, and the BECS-associated reintervention rate was 1%. CONCLUSIONS: The flare geometry of the VBX bridging stent did not change significantly during 14 months follow-up in this study. Three-dimensional geometric analysis of the flare may contribute to identify the origin of endoleaks and occlusions, but this should be confirmed in a larger study including enough patients and BECS to compare complicated and uncomplicated cases.Clinical ImpactThe three-dimensional flare geometry of the Gore Viabahn VBX BECS was assessed on the first and second postoperative CTA scans, and geometrical changes during this period were identified. For BECS that were diagnosed with a type 3c endoleak or occlusion, the BECS geometry was analyzed to detect geometrical components that were related to the complication. Geometric analysis of the flare may help to better detect and identify the cause of such complications.
引用
- Fouad F, Saleem BR, Tielliu IFJ, et al. Three-Dimensional Geometric Analysis of Viabahn VBX Bridging Stent Grafts in Fenestrated Endovascular Aortic Repair: A Multicenter, Retrospective Cohort Study. J Endovasc Ther. 2024. PMID: 38708986. doi:10.1177/15266028241248600
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。