文献速递主动脉疾病

电灼导丝技术在复杂主动脉介入中的应用:病例系列

The Electrified Wire Technique in Complex Aortic Interventions: A Case Series.
PubMed 文献 · J Endovasc Ther · 2024-04-10

单中心回顾性病例系列纳入2020年10月至2023年8月接受复杂主动脉手术并使用电灼导丝技术的患者,共治疗11例主动脉夹层和1例主动脉闭锁。技术操作包括刺破夹层内膜片或左锁骨下动脉原位开窗,以及切割夹层内膜片(「动力奶酪丝技术」)。所有病例技术均成功应用,无技术相关并发症。作者认为该技术可行且工具易得,可安全用于复杂主动脉介入。

要点

  • 电灼导丝技术通过电灼笔外接电流,经绝缘导丝对主动脉组织或移植物进行电外科操作。
  • 所有病例技术成功应用,无技术相关并发症发生。

核心结论

  • 作者认为「电灼导丝」技术可行且工具易得,可安全用于复杂主动脉介入,尤其适用于刺破主动脉组织如夹层内膜片,或通过刺破移植物织物进行原位开窗修复。

研究设计与样本

  • 单中心回顾性病例系列,纳入2020年10月至2023年8月所有接受复杂主动脉手术并使用电灼导丝技术的患者。
  • 共治疗11例主动脉夹层和1例主动脉闭锁;4例急诊手术,其余为计划手术。

主要发现

  • 7例进行夹层内膜片刺破,2例进行动力奶酪丝技术,2例进行左锁骨下动脉原位开窗,1例跨过主动脉峡部闭锁。
  • 技术在所有病例中成功应用,无技术相关并发症发生。

关键数值与推荐

  • 电灼导丝制备:0.014英寸聚四氟乙烯绝缘导丝末端用手术刀剥离绝缘层,电灼笔用钳子连接。
  • 刺破夹层内膜片或左锁骨下动脉原位开窗:弯曲头端导管或鞘管抵住主动脉内膜片或内移植物,推送导丝并激活电灼笔。
  • 动力奶酪丝技术:0.014导丝中段去除聚四氟乙烯并弯成V形,从真腔跨至假腔建立贯通通道,两侧鞘管抵住内膜片上下移动并激活电灼以切割内膜片。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVES: Electrosurgery has been long used in endovascular procedures, with only case reports in the aortic field. Our aim is to present a case series with the use of an electrified wire to perform catheter-based electrosurgery by applying external current through an electrocautery pen. METHODS: Single-center retrospective case series of all patients undergoing complex aortic surgery from October 2020 to August 2023, in whom the electrified wire technique was used: (1) Perforation of a dissection flap or left subclavian artery (LSA) in situ endograft fenestration-a 0.014" polytetrafluoroethylene (PTFE) insulated guidewire is detached from the insulation with a scalpel at the end and a cautery pen is here attached with a clamp. A curved tip catheter or sheath is positioned against the aortic flap or the endograft (through a left brachial access in this case) and the wire pushed, crossing the flap by activating the electrocautery pen and (2) slicing a dissection flap ("powered cheese-wire technique")-after same preparation as above, the middle section of the 0.014 guidewire is removed from the PTFE and bent into a V-shape. Once in the aorta, the guidewire crosses from the true lumen (TL) to the false lumen (FL) and a through-and-through access is obtained. Sheaths are positioned against the flap from both sides and moved up or down while the electricity is activated, slicing the flap and communicating both lumens. Technical success and technical-related complications were evaluated. RESULTS: Eleven cases concerning aortic dissections and 1 case of aortic atresia were treated. Four patients presented urgently, whereas the rest were planned procedures. Seven cases underwent perforation of a dissection flap, 2 cases underwent the powered cheese-wire technique, in 2 cases for an LSA in situ fenestration, and in 1 case to cross an aortic atresia at the aortic isthmus. The technique was in all cases successfully applied. No complications related to the technique occurred. CONCLUSIONS: The "electrified wire" technique is a feasible and ready-available tool that can be safely used in complex aortic interventions, especially to perforate aortic tissue like dissection flaps or to perform in situ fenestrated repairs by perforation of the endograft fabric.Clinical ImpactThe electrified wire technique described herein is a straightforward technique that uses readily available tools to perform electrosurgery. We present its use in complex aortic procedures. However, it could be envisioned for any vascular procedure that requires crossing of the vessel or even prosthetic material. As we have described in this series, when used along with an adequate properative planning, it can be a safe tool of great utility, as has already been demonstarted in the field of the interventional cardiology.

来源:J Endovasc Ther,查看原文。版权归原作者所有。

引用

  1. Torrealba JI, Panuccio G, Rohlffs F, et al. The Electrified Wire Technique in Complex Aortic Interventions: A Case Series. J Endovasc Ther. 2024. PMID: 38597263. doi:10.1177/15266028241245341

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。