基于离体猪主动脉模型的破口位置、长度和厚度在Stanford B型主动脉夹层扩展中的作用
研究利用离体猪主动脉构建Stanford B型主动脉夹层模型,随机分6组比较内膜破口位置(外弯vs内弯)、长度(长vs短)和厚度(厚vs薄)对假腔扩展的影响。结果显示破口位于外弯者假腔峰值压力和轴向扩展长度均低于内弯者,长破口和厚破口者峰值压力更高。多变量线性回归提示轴向扩展长度与初始假腔长度和峰值压力相关。
要点
- 破口位于外弯的假腔峰值压力和轴向扩展长度均低于内弯。
- 长破口和厚破口者的假腔峰值压力分别高于短破口和薄破口。
- 多变量线性回归显示轴向扩展长度与初始假腔长度和峰值压力相关。
核心结论
- 假腔扩展与内膜破口的位置、长度和厚度存在关系,轴向扩展长度与内膜破口长度和扩展峰值压力相关,可能有助于评估Stanford B型主动脉夹层患者的扩展风险。
研究设计与样本
- 研究采用离体猪主动脉构建Stanford B型主动脉夹层模型,随机分为6组,分别比较破口位置(A组外弯vs B组内弯)、长度(C组长vs D组短)和厚度(E组厚vs F组薄)。
- 每组模型均通过实验循环回路进行离体灌注实验,持续监测假腔压力,并比较实验前后形态学数据以量化假腔变化。
主要发现
- A组假腔平均峰值压力低于B组(106.87±15.55 vs. 124.01±22.75 mm Hg,p=0.028)。
- A组平均轴向扩展长度短于B组(88.14±33.38 vs. 197.43±41.65 mm,p<0.001)。
- C组平均峰值压力高于D组(144.04±19.37 vs. 92.51±26.70 mm Hg,p<0.001)。
- E组平均峰值压力高于F组(160.83±32.83 vs. 109.33±15.62 mm Hg,p<0.001),E组平均轴向扩展长度也长于F组(143.11±39.73 vs. 100.45±35.44 mm,p=0.021)。
- 多变量线性回归结果显示:轴向扩展长度=45.873−0.703×初始假腔长度+0.863×峰值压力(p<0.001)。
临床怎么用
- 作者认为,利用夹层破口特征可能有助于预测患者假腔发展并制定治疗方案。
局限性
- 实验采用无远端再破口的假腔和非搏动性血流进行灌注实验。
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To explore the role of location, length, and thickness of the intimal flap in the propagation of Stanford type B aortic dissection (TBAD) based on ex vivo porcine aorta models based on ex vivo porcine aorta models. MATERIALS AND METHODS: The porcine aortas were harvested and randomly divided into 6 groups to create various TBAD aortic models. We constructed intimal flaps for different locations (group A [entry tear on outer curvature] and group B [entry tear on inner curvature]), lengths (group C [long] and group D [short]), and thicknesses (group E [thick] and group F [thin]). For the ex vivo perfusion experiments conducted on model aortas, an experimental circulation loop (ECL) was employed. The pressure in false lumen (FL) was constantly monitored. A comparison was made between the morphological data collected before and after the experiment to quantify the changes in the FL after the experiment. RESULTS: Compared the results with group B, the mean peak pressures of the FL in group A were lower (106.87±15.55 vs. 124.01±22.75 mm Hg, p=0.028). The mean axial propagation length in group A was shown to be shorter than that of group B (88.14±33.38 vs. 197.43±41.65 mm, p<0.001). The mean peak pressure was higher in group C than in group D (144.04±19.37 vs. 92.51±26.70 mm Hg, p<0.001). The mean peak pressure of group E was higher than that of group F (160.83±32.83 vs. 109.33±15.62 mm Hg, p<0.001), as was the mean axial propagation length of group E (143.11±39.73 vs. 100.45±35.44 mm, p=0.021). According to the results of multivariable linear regression, axial propagation length=45.873-0.703×length of initial FL+0.863× peak pressure (p<0.001). CONCLUSION: There was a relationship between FL propagation and the location, length, and thickness of the intimal flap. The axial propagation length was related to the length of the intimal flap and the peak pressure of propagation. It may be helpful to evaluate the risk of propagation in patients with TBAD.Clinical ImpactThis study found that the locations, lengths, and thickness of the intimal flap significantly contributed to propagation pressure of FL. Using dissection flap characteristics, a physician can predict FL development in a patient and formulate a treatment plan.The purpose was to investigate the relationship between the dissection flap characteristics (location, length, and thickness) and the propagation of the FL, which is not clear at present. This study employed porcine models to create an experimental circulation loop. The perfusion experiment was conducted using a FL without distal re-entry and a non-pulsating flow.
引用
- Wang S, Jia H, Xi Y, et al. The Role of Location, Length, and Thickness of the Intimal Flap in the Propagation of Stanford Type B Aortic Dissection Based on Ex Vivo Porcine Aorta Models. J Endovasc Ther. 2023. PMID: 37728019. doi:10.1177/15266028231199930
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。