定制开窗主动脉弓装置常见设计及即用型设计的适用性
多中心横断面研究分析131例中远端主动脉弓TEVAR定制开窗移植计划,其中127例纳入设计重叠分析;94例(71.8%)为扇贝形加单开窗设计,33例(25.2%)为单开窗,4例(4.3%)为单扇贝形;提出两种主要移植计划,总体理论可行性为85.8%(n=109),两种设计分别为47.2%(n=60)和38.6%(n=49)。
要点
- 127例纳入分析的定制开窗主动脉弓移植计划中,71.8%(94例)为扇贝形加单开窗设计。
- 提出的两种主要移植计划总体理论可行性为85.8%(n=109),两种设计分别为47.2%(n=60)和38.6%(n=49)。
- 作者认为研究的设计间重叠程度高,但需在真实世界队列中进一步研究即用型可行性。
核心结论
- 研究的开窗和/或扇贝形胸主动脉腔内修复(TEVAR)移植设计间重叠程度高。
- 作者认为需在真实世界患者队列中进一步研究这些设计以评估即用型可行性。
研究设计与样本
- 多中心横断面研究,分析来自8个中心的中远端主动脉弓定制开窗主动脉腔内移植匿名计划。
- 排除针对超过2条动脉的移植;不分析患者/临床数据;共纳入131例移植计划,排除4例单扇贝形后对127例进行设计重叠分析。
主要发现
- 131例移植计划中,94例(71.8%)为扇贝形加单开窗设计,33例(25.2%)为单开窗,4例(4.3%)为单扇贝形。
- 提出的两种主要移植计划配置相似(1个宽30 mm、高20 mm、位于12:00位置的扇贝形;1个直径8 mm、距移植顶端26 mm、位于12:00位置的预装开窗;锥形,长度193 mm,远端直径32 mm),近端直径分别为38 mm(计划1)和44 mm(计划2)。
- 两种设计总体理论可行性为85.8%(n=109),计划1为47.2%(n=60),计划2为38.6%(n=49)。
临床怎么用
- 作者认为需在真实世界患者队列中进一步研究这些设计,以进一步评估即用型可行性。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To analyze device designs, similarities and overlaps of custom-made fenestrated arch endografts intended for mid/distal arch thoracic endovascular aortic repair. MATERIALS AND METHODS: A multicenter cross-sectional study analyzing custom-made anonymized graft plans was performed. Graft plans were included from a cohort of mid/distal aortic arch repairs using custom-made fenestrated aortic endografts treated at 8 centers. Grafts targeting >2 arteries were excluded. No patient/clinical data were analyzed. A descriptive analysis was performed followed by an analysis of overlap of the designs to reach a common design in which the greatest number of grafts would overlap. RESULTS: One hundred thirty-one graft plans were included. All grafts were custom-made grafts from the COOK Medical Fenestrated arch platform. Ninety-four (71.8%) had a scallop-and-single-fenestration design, 33 (25.2%) had a single fenestration and 4 (4.3%) a single scallop. For analysis purposes, these latter 4 grafts were excluded. Two main graft plans (Plans 1 and 2) were proposed after analysis with similar configuration (1 scallop with 30 mm width, 20 mm height, 12:00 position; 1 preloaded fenestration with 8 mm diameter, 26 mm from the top of the graft and 12:00 position; tapered, with a 193 mm length and 32 mm distal diameter) but with 2 different proximal diameters of 38 mm (Plan 1) and 44 mm (Plan 2), reaching an overall feasibility of 85.8% (n=109), being 47.2% (n=60) and 38.6% (n=49) for each design, respectively. CONCLUSION: The degree of overlap between the studied fenestrated and/or scalloped thoracic endovascular aneurysm repair (TEVAR) graft designs was high. Future studies analyzing these designs in a real-world cohort of patients are needed to further address off-the-shelf feasibility.Clinical ImpactIn a multicenter study analyzing 127 fenestrated aortic arch endograft plans from 9 aortic centers, we found that the degree of overlap between the studied fenestrated and/or scalloped arch graft designs was high and that 2 proposed graft designs would be theoretically applicable in 85.8% of cases. Future studies analyzing these designs in a real-world cohort of patients are needed to further address off-the-shelf feasibility.
引用
- Gouveia E Melo R, Fernández Prendes C, Khanafer A, et al. Common Designs of Custom-Made Fenestrated Arch Devices and Applicability of an Off-the-Shelf Design. J Endovasc Ther. 2023. PMID: 37300282. doi:10.1177/15266028231179593
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。