三维打印在挑战性II型内漏病例中的应用
本文报告一例81岁EVAR术后II型内漏患者,内漏主要起源于正中骶动脉,因左侧髂内动脉与正中骶动脉间动脉交通极度迂曲,经封堵和经动脉途径栓塞初期尝试均未成功。构建主动脉和髂腰动脉透明树脂三维模型后,术前模拟改善了解剖理解,后续经动脉栓塞成功,显著减少总手术时间和辐射剂量。
要点
- 三维打印透明树脂动脉模型有助于II型内漏经动脉栓塞的术前规划。
- 模型可改善解剖理解并允许无透视模拟。
- 作者认为在复杂II型内漏栓塞指征明确的选定病例中,制作真人大小主动脉模型可能提高手术成功率并减少透视时间。
核心结论
- 打印透明树脂三维动脉模型有助于II型内漏的经动脉栓塞,改善解剖理解并允许简单的无透视模拟。
研究设计与样本
- 病例报告:一例81岁既往接受EVAR治疗的患者发生II型内漏需治疗,内漏主要起源为正中骶动脉。
主要发现
- 经封堵和经动脉途径栓塞的初期尝试因左侧髂内动脉与正中骶动脉间动脉交通极度迂曲而未成功。
- 构建主动脉和髂腰动脉透明树脂三维模型后,术前模拟改善了解剖理解,后续经动脉栓塞成功。
- 后续经动脉栓塞显著减少了总手术时间和辐射剂量。
临床怎么用
- 作者认为在复杂II型内漏栓塞指征明确的选定病例中,制作真人大小主动脉模型可带来更好的动脉解剖理解,从而可能提高手术成功率并减少手术时间及最重要的透视时间。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To highlight the importance of 3-dimensional (3D) arterial printing in a case of type II endoleak (EL) embolization. CASE REPORT: An 81-year-old patient, previously treated with endovascular aortic repair (EVAR), developed a type II EL requiring treatment. The EL's main origin was the median sacral artery (MSA). Initial attempts in embolization via a transsealing and transarterial approach were unsuccessful owing to extremely tortuous arterial communications between the left hypogastric artery and the MSA. The construction of a clear resin 3D model of the aorta and iliolumbar arteries improved anatomy understanding and moreover allowed a preoperative simulation. The subsequent transarterial attempt in embolization was resolutive, significantly reducing total procedural time and radiation dose. CONCLUSION: Printing of clear resin 3D arterial models facilitates type II EL transarterial embolization, improving anatomy understanding and allowing simple fluoroscopy-free simulations. CLINICAL IMPACT: The aim of our work is to highlight the additional value of three-dimensional (3D) printing during preoperative planning of challenging endovascular cases. To our best knowledge, this is the first report about 3D printing use in a case of type II endoleak (EL). We believe that realizing life-size aortic models in selected cases where a complex type II EL embolization procedure is indicated, could lead to a better understanding of arterial anatomy, thus allowing to increase procedural success and reduce operative and most importantly fluoroscopy time.
引用
- Colacchio EC, Berton M, Volpe A, et al. Three-Dimensional Printing Application in a Challenging Case of Type II Endoleak. J Endovasc Ther. 2022. PMID: 36129167. doi:10.1177/15266028221124441
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。