在三维主动脉模板中制作的医师改良支架移植物比基于计算机断层扫描测量结果改良的支架移植物具有更好的可靠性和与目标血管的对齐性
3D模板组具有更高的组内相关系数和Pearson/Spearman相关性,开窗与目标血管对齐率更高(p=0.007)。结论认为3D模板制作的医师改良支架移植物更可靠且对齐性更好。
要点
- 3D模板组医师改良支架移植物的组内相关系数和Pearson/Spearman相关性高于CT测量组。
- 3D模板组开窗与目标血管对齐率高于CT测量组(p=0.007)。
核心结论
- 用3D模板制作的医师改良支架移植物比基于CT测量结果制作的医师改良支架移植物更可靠,且开窗与目标血管的对齐性更好。
研究设计与样本
- 选取10例既往接受开窗腔内修复的主动脉瘤患者的CT扫描,3D打印主动脉模板和弹性血管体模。
- 2名血管外科医生分别使用3D模板和基于CT测量的改良方案进行开窗。
- 2名操作者各在主动脉模板中制作10枚开窗支架移植物、各使用CT测量制作10枚,共40枚开窗支架移植物。
- 支架移植物植入弹性血管体模以评估开窗与目标血管的对齐情况。
主要发现
- 用3D模板制作的医师改良支架移植物具有更高的组内相关系数值以及Pearson/Spearman相关性,优于基于CT测量制作的开窗。
- 3D模板制作的医师改良支架移植物开窗与目标血管的对齐率更高(p=0.007)。
关键数值与推荐
- 开窗对齐采用5分制评估:0%、1%至25%、26%至50%、51%至75%、76%至100%。
- 开窗间距离用于计算两种方法的观察者间变异性。
- 测量结果以组内相关系数(ICC)、Pearson和Spearman相关性以及Bland-Altman图处理。
临床怎么用
- 原文未据此给出临床推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Physician-modified stent-grafts (PMSG) are widely used, especially when a patient's condition precludes waiting for a custom-made device. In recent years, the modification process has been upgraded using 3-dimensional (3D) aortic templates. Nonetheless, the reliability of PMSG and accuracy of fenestration alignment with the target vessel are not known. Thus, the study is aimed to fulfill the gap in current knowledge. MATERIALS AND METHODS: Ten computed tomographic (CT) scans of aortic aneurysm previously treated with the fenestrated endovascular repair were selected to 3D-print aortic templates and elastic vessel phantoms. Two vascular surgeons performed fenestrations using the 3D template and modification plan based on CT measurements. Two operators each performed 10 fenestrated stent-grafts in the aortic template and 10 using CT measurements, for a total of 40 fenestrated stent-grafts. Then, stent-grafts were implanted in elastic vessel phantoms, which served to evaluate fenestration alignment with the target vessel. The alignment was judged in a 5-point scale: 0%, 1% to 25%, 26% to 50%, 51% to 75%, and 76% to 100%. The distances between fenestrations served to calculate interobserver variability for both methods. The measurements were processed as interclass correlation coefficient (ICC), Pearson and Spearman correlation, and Bland-Altman plots. RESULTS: PMSG created with a 3D template had higher interclass correlation coefficient values and Pearson/Spearman correlation than fenestrations created from CT measurements. The rate of fenestration alignment with the target vessel was higher for PMSG created with a 3D template (p=0.007). CONCLUSIONS: PMSGs created with a 3D template are more reliable and have better fenestration alignment with the target vessel than PMSGs created based on CT measurements.
引用
- Rynio P, Gutowski P, Kazimierczak A, et al. Physician-Modified Stent-Grafts Created in the Three-Dimensionally Aortic Template Have Better Reliability and Greater Alignment With the Target Vessels Than Stent-Grafts Modified Based on Measurements From Computed Tomography. J Endovasc Ther. 2022. PMID: 35543452. doi:10.1177/15266028221095396
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。