牛型主动脉弓变异中血管内支架移植物移位力的快速近似量化
研究在34例牛型主动脉弓变异受试者中,将仅利用主动脉弓解剖和中心主动脉压力测值的快速近似法与计算流体力学金标准对比,评估支架移植物移位力。快速近似法一致反映计算流体力学所得的移位力模式(r²=0.99,p<0.0001),移位力大小偏倚-1.1%、方向偏倚0.7°。归一化等效表面牵引力从0区至3区逐渐增加(p<0.0001),3区显著大于2区(p<0.0001)。作者认为该方法仅需数秒,适合真实术前决策过程。
要点
- 快速近似法一致反映计算流体力学所得的移位力模式(r²=0.99,p<0.0001)。
- 移位力大小偏倚-1.1%,方向偏倚0.7°。
- 归一化等效表面牵引力从0区至3区逐渐增加(p<0.0001),3区显著大于2区(p<0.0001)。
核心结论
- 仅需数秒即可量化弓部胸主动脉腔内修复近端锚定区的临床相关生物力学参数,适合真实术前决策过程。
- 该方法为分析大样本患者并进而定义未来患者特异性术前胸主动脉腔内修复规划的阈值铺平道路。
研究设计与样本
- 在34例牛型主动脉弓变异受试者中,将快速近似法与计算流体力学金标准进行对比。
- 每个数据集由计算机断层扫描血管造影重建主动脉弓管腔三维模型,再用计算流体力学计算近端锚定区内的移位力。
- 快速近似法忽略壁面剪切应力对移位力的贡献,并将血压空间分布在整个主动脉壁上平均以可靠近似患者特异性中心血压;移位力值对相应近端锚定区面积归一化得到等效表面牵引力。
主要发现
- 快速近似法一致反映计算流体力学所得的移位力模式(r²=0.99,p<0.0001)。
- 移位力大小偏倚为-1.1%,方向偏倚为0.7°。
- 归一化等效表面牵引力从0区至3区逐渐增加(p<0.0001),与弓型无关;近端锚定区3区受力显著大于2区(p<0.0001)。
- 移位力对相应主动脉表面归一化后,快速近似等效表面牵引力解耦为血压和反映主动脉弓形态的无量纲形状向量(S)。
- S显示区特异性方向模式,并被证明是移位力对胸主动脉壁影响的有效生物力学蓝图。
临床怎么用
- 作者认为该方法仅需数秒即可量化弓部胸主动脉腔内修复近端锚定区的临床相关生物力学参数,适合真实术前决策过程。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Displacement forces (DFs) identify hostile landing zones for stent graft deployment in thoracic endovascular aortic repair (TEVAR). However, their use in TEVAR planning is hampered by the need for time-expensive computational fluid dynamics (CFD). We propose a novel fast-approximate computation of DFs merely exploiting aortic arch anatomy, as derived from the computed tomography (CT) and a measure of central aortic pressure. MATERIALS AND METHODS: We tested the fast-approximate approach against CFD gold-standard in 34 subjects with the "bovine" aortic arch variant. For each dataset, a 3-dimensional (3D) model of the aortic arch lumen was reconstructed from computed tomography angiography and CFD then employed to compute DFs within the aortic proximal landing zones. To quantify fast-approximate DFs, the wall shear stress contribution to the DF was neglected and blood pressure space-distribution was averaged on the entire aortic wall to reliably approximate the patient-specific central blood pressure. Also, DF values were normalized on the corresponding proximal landing zone area to obtain the equivalent surface traction (EST). RESULTS: Fast-approximate approach consistently reflected (r2=0.99, p<0.0001) the DF pattern obtained by CFD, with a -1.1% and 0.7° bias in DFs magnitude and orientation, respectively. The normalized EST progressively increased (p<0.0001) from zone 0 to zone 3 regardless of the type of arch, with proximal landing zone 3 showing significantly greater forces than zone 2 (p<0.0001). Upon DF normalization to the corresponding aortic surface, fast-approximate EST was decoupled in blood pressure and a dimensionless shape vector (S) reflecting aortic arch morphology. S showed a zone-specific pattern of orientation and proved a valid biomechanical blueprint of DF impact on the thoracic aortic wall. CONCLUSION: Requiring only a few seconds and quantifying clinically relevant biomechanical parameters of proximal landing zones for arch TEVAR, our method suits the real preoperative decision-making process. It paves the way toward analyzing large population of patients and hence to define threshold values for a future patient-specific preoperative TEVAR planning.
引用
- Sturla F, Caimi A, Romarowski RM, et al. Fast Approximate Quantification of Endovascular Stent Graft Displacement Forces in the Bovine Aortic Arch Variant. J Endovasc Ther. 2022. PMID: 35588222. doi:10.1177/15266028221095403
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。