经左锁骨下动脉血管塞穿透行囊腔栓塞消除胸主动脉腔内修复术后2型内漏
本文描述一种技术:用高尖端负荷的锥形导丝穿透已置入左锁骨下动脉的血管塞,将微导管引入内漏瘤腔,从而对胸主动脉腔内修复术后2型内漏进行追加栓塞。所呈病例中,尽管左锁骨下动脉已用血管塞栓塞但仍通畅并导致内漏,该技术成功消除了该2型内漏。
要点
- 当左锁骨下动脉或髂内动脉等大动脉用血管塞栓塞后仍通畅并导致2型内漏时,可尝试血管塞穿透技术。
- 高尖端负荷的锥形导丝可穿透血管塞的盘面,随后将微导管引入内漏瘤腔。
- 所呈病例中该技术经已栓塞但仍通畅的左锁骨下动脉成功消除了胸主动脉瘤的2型内漏。
核心结论
- 血管塞穿透技术可经置入主动脉分支的血管塞进入内漏腔,对主动脉腔内修复术后的2型内漏进行追加栓塞。
研究设计与样本
- 本文为技术描述,报告一例胸主动脉腔内修复术后2型内漏的病例。
主要发现
- 所呈病例中,左锁骨下动脉虽已用血管塞栓塞但仍通畅并导致2型内漏,经血管塞穿透技术成功消除了该内漏。
关键数值与推荐
- 当左锁骨下动脉或髂内动脉等大动脉用血管塞栓塞后仍通畅并导致内漏时,血管塞穿透技术对该2型内漏的追加栓塞有效。
临床怎么用
- 作者描述的技术为:用高尖端负荷的锥形导丝穿透血管塞盘面,再将微导管引入内漏瘤腔进行追加栓塞。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To describe a technique of vascular plug penetration by a guidewire with a heavy tip load for additional embolization of a type 2 endoleak after endovascular aortic aneurysm repair (EVAR). TECHNIQUE: The technique of vascular plug penetration is effective for additional embolization of a type 2 endoleak, when large arteries such as left subclavian artery (LSA) or hypogastric artery remain patent even after the embolization of the vessel has been performed using a vascular plug and are responsible for the endoleak. A tapered guidewire with a heavy tip load enables the penetration of the disk of the plug, followed by introduction of a microcatheter into the endoleak nidus. In the presented case, the technique successfully eliminated a type 2 endoleak in a thoracic aortic aneurysm for which a patent LSA despite the embolization by a vascular plug was responsible. CONCLUSION: The technique of vascular plug penetration allows an access to an endoleak cavity via a vascular plug placed in an aortic side branch for additional embolization of a type 2 endoleak after EVAR.
引用
- Nagatomi S, Ichihashi S, Kanamori D, et al. Successful Sac Embolization to Eliminate a Type 2 Endoleak After Thoracic Endovascular Aortic Repair by Penetration of a Vascular Plug Implanted in a Left Subclavian Artery. J Endovasc Ther. 2021. PMID: 34969293. doi:10.1177/15266028211067730
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。