文献速递肾癌与肾肿瘤

3D打印与 hydrogel 浇铸制作患者特异性机器人辅助肾部分切除术预演平台

Utilizing 3D Printing and Hydrogel Casting for the Development of Patient-Specific Rehearsal Platforms for Robotic Assisted Partial Nephrectomies.
PubMed 文献 · Urology · 2020-10-28

本研究利用患者CT扫描数据,通过3D打印和水凝胶浇铸技术制作解剖精确的患者特异性肾部分切除术预演平台,并在8例患者术前24-48小时进行全流程预演。结果显示平台解剖偏差小、组织力学特性接近活体,且预演与真实手术的热缺血时间和估计失血量呈正相关。

要点

  • 7%-3次冻融PVA水凝胶最能复现猪肾的机械与功能特性。
  • 解剖验证显示肾脏和肿瘤偏差≤1 mm,肾门结构偏差≤3 mm。
  • 预演与真实手术的热缺血时间和估计失血量呈正相关。

核心结论

  • 该方法可重复、解剖精度高、组织特性真实,且预演与真实手术之间存在转化效应。

研究设计与样本

  • 基于患者CT扫描分割构建CAD文件,结合3D打印和水凝胶浇铸制作患者特异性肾脏模型,并完成机械与功能测试及解剖验证。
  • 为8例患者制作预演平台,平均肿瘤大小5.92 cm,肾镜评分9.8,术前24-48小时完成全流程预演,并与真实手术的临床指标比较。

主要发现

  • 7%-3次冻融PVA水凝胶最能复现猪肾的机械与功能特性。
  • 解剖验证显示肾脏和肿瘤与患者解剖偏差≤1 mm,肾门结构偏差≤3 mm。
  • 预演与真实手术的热缺血时间和估计失血量呈正相关。

临床怎么用

  • 可利用3D打印和水凝胶浇铸制作患者特异性预演平台,用于机器人辅助肾部分切除术的术前预演。

局限性

  • 未来需比较术前预演与标准手术准备对患者结局的影响。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Three-dimensional (3D) printing technology has been utilized to create patient-specific (PS) replicas as visual aids for surgical planning.1-4 However, they cannot recreate the operative experience due to a lack of realistic tissue characteristics. OBJECTIVES: Develop anatomically accurate, realistic, PS partial nephrectomy platforms suitable for pre-operative surgical rehearsals using 3D-printing and hydrogel casting. MATERIAL: Patient CT scans were segmented into a computer-aided design (CAD) file and used to create injection casts. Kidney and tumor casts along with hollow vascular and urinary structures were 3D-printed. The hilar structures and tumor were registered into the kidney cast, injected with poly-vinyl alcohol (PVA) hydrogel, and processed to create the kidney phantom. Mechanical and functional testing protocols were completed to confirm that the properties of PVA matched the live tissue.5 Anatomical accuracy was confirmed by CT scanning the phantom and creating another CAD, which was compared to the original patient CAD. Full-procedural PS rehearsals were completed 24-48 hours prior to their respective live surgeries. Clinically relevant metrics (warm ischemia time, estimated blood loss, and positive surgical margins) from each rehearsal and live case were compared using a Wilcoxon-rank sum test. RESULTS: The 7%-3freeze/thaw PVA best recreated the mechanical and functional properties of porcine kidneys, while anatomical verification showed ≤1 mm deviation of the kidney and tumor from the patient anatomy and ≤3 mm for the hilar structures. PS rehearsal platforms were fabricated using these methods for 8 patients (average tumor size 5.92 cm and nephrometry score 9.8). A positive correlation was found for warm ischemia time and estimated blood loss between rehearsals and live surgeries. CONCLUSION: This reproducible method shows high anatomical accuracy, realistic tissue properties, and translational effects between rehearsals and live surgery. To determine the effects on patient outcomes, future studies will compare the impact of completing a pre-operative rehearsal vs standard surgical preparation.

来源:Urology,查看原文。版权归原作者所有。

引用

  1. Ghazi A, Saba P, Melnyk R, et al. Utilizing 3D Printing and Hydrogel Casting for the Development of Patient-Specific Rehearsal Platforms for Robotic Assisted Partial Nephrectomies. Urology. 2020. PMID: 33129872. doi:10.1016/j.urology.2020.10.023

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。