背侧覆盖颊黏膜移植物尿道成形术培训与评估工具(UTAT)的开发与内容验证
本研究采用医疗失效模式与效应分析(HFMEA),在国际范围内开发并验证用于背侧覆盖颊黏膜移植物尿道成形术培训与评估的工具(UTAT)。研究历时11个月,由12名国际专家及多学科团队完成内容验证,最终工具包含5个阶段、10个流程和23个子流程。作者认为该模块化工具可用于标准化泌尿外科受训医师的培训与评估。
要点
- 采用HFMEA方法开发背侧覆盖颊黏膜移植物尿道成形术培训与评估工具(UTAT)。
- 内容验证由12名国际专家及多学科团队完成,工具含5个阶段、10个流程、23个子流程。
- 作者认为该模块化工具可用于标准化泌尿外科受训医师的培训与评估。
核心结论
- 作者认为,模块化UTAT是通过详细HFMEA方案开发的、经验证的综合培训工具。
- 作者认为该工具可用于标准化泌尿外科受训医师的培训与评估。
研究设计与样本
- 国际观察性研究,历时11个月,采用医疗失效模式与效应分析(HFMEA)识别和评估尿道成形术的危险阶段以开发UTAT。
- 内容验证由来自国际三级中心的12名专家外科医师和多学科团队完成。
主要发现
- HFMEA流程产生了国际验证的UTAT。
- 纳入危害评分≥4和单点弱项以实施行动和结局指标。
- 通过传阅流程地图、危害分析表和所开发工具完成内容验证,并根据专家反馈实施修改。
- 内容验证的背侧覆盖颊黏膜移植物球部尿道成形术UTAT包含5个阶段、10个流程和23个子流程。
关键数值与推荐
- 纳入UTAT的危害评分为≥4和单点弱项。
- 内容验证的背侧覆盖颊黏膜移植物球部尿道成形术UTAT包含5个阶段、10个流程和23个子流程。
- 内容验证由12名专家外科医师和多学科团队完成。
临床怎么用
- 作者认为,该模块化UTAT可用于标准化泌尿外科受训医师的培训与评估。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVES: To develop and validate the Urethroplasty Training and Assessment Tool (UTAT) using Healthcare Failure Mode and Effect Analysis (HFMEA) for training and assessment of urology trainees learning this urethral reconstruction technique, as urethroplasty is the 'gold standard' treatment for long and recurrent urethral strictures and with a variety of techniques and a lack of standardised reconstructive curricula, there is a need for procedure-specific training tools to improve surgeon training and patient safety. MATERIALS AND METHODS: This international observational study was performed over an 11-month period. The HFMEA was used to identify and evaluate hazardous stages of urethroplasty to develop the UTAT. Hazard scores were calculated for the included steps of urethroplasty. Content validation was performed by 12 expert surgeons and multidisciplinary teams from international tertiary centres. RESULTS: The HFMEA process resulted in an internationally validated UTAT. Hazard scores ≥4 and single point weaknesses were included to implement actions and outcome measures. Content validation was achieved by circulating the process map, hazard analysis table, and developed tools. Changes were implemented based on the feedback received from expert surgeons. The content validated dorsal onlay buccal mucosa graft bulbar UTAT contained five phases, 10 processes and 23 sub-processes. CONCLUSIONS: The modular UTAT offers a comprehensive validated training tool developed via a detailed HFMEA protocol. This may be utilised to standardise the training and assessment of urology trainees.
引用
- Jasionowska S, Shabbir M, Brunckhorst O, et al. Development and content validation of the Urethroplasty Training and Assessment Tool (UTAT) for dorsal onlay buccal mucosa graft urethroplasty. BJU Int. 2020. PMID: 31131961. doi:10.1111/bju.14830
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。