末端执行器机器人辅助康复中的人类手臂关节重建算法
该研究提出一种仅用上臂一个加速度计即可稳定重建上肢关节运动学的算法,并在健康受试者与三名卒中患者中验证。健康受试者中肘、腕关节位置误差分别为2.13cm和1.89cm,七关节平均角度误差约3.5度;该算法在肩部运动时较原算法更稳定,可在无光电系统的临床环境中客观测定关节活动度。
要点
- 仅用上臂一个加速度计即可重建上肢关节角度,无需光电系统。
- 健康人测试中肘、腕位置RMSE为2.13cm和1.89cm,角度RMSE约3.5度。
- 卒中患者肩部代偿运动时,原算法不稳定而新算法更稳健。
核心结论
- 所提算法能在末端执行器机器人辅助神经康复治疗中准确估计人体上肢关节。
- 仅需上臂一个加速度计即可在临床环境实施该方案,关节活动度可成为客观评估参数。
研究设计与样本
- 方法学研究:基于增广雅可比逆的关节重建算法,用加速度计旋转估计肘关节位置并计算初始构型。
- 健康受试者手持七自由度机器人末端执行器完成上肢运动,以光电系统验证算法精度。
- 另在「PUPArm」平面机器人辅助的神经康复治疗中,对三名卒中患者比较原算法与新算法的稳定性。
主要发现
- 肘关节位置RMSE为2.13cm,腕关节位置RMSE为1.89cm,均与光电系统高相关。
- 七关节角度RMSE均值约3.5度,所有关节与光电系统所测真实上肢高相关。
- 卒中患者因躯干代偿出现肩部运动时,原算法估计上肢关节出现不稳定。
关键数值与推荐
- 肘关节位置误差RMSE 2.13cm,腕关节位置误差RMSE 1.89cm。
- 七关节角度误差RMSE均值约3.5度。
临床怎么用
- 可在无光电系统的临床环境中仅用上臂一个加速度计估计上肢关节角度。
- 测得的关节活动度可作为末端执行器机器人辅助康复的客观评估参数。
局限性
- 精度验证主要在健康受试者完成,卒中患者仅纳入三名用于算法稳定性比较。
- 原文未报告卒中患者关节角度误差的定量数值。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: End-effector robots are commonly used in robot-assisted neuro-rehabilitation therapies for upper limbs where the patient's hand can be easily attached to a splint. Nevertheless, they are not able to estimate and control the kinematic configuration of the upper limb during the therapy. However, the Range of Motion (ROM) together with the clinical assessment scales offers a comprehensive assessment to the therapist. Our aim is to present a robust and stable kinematic reconstruction algorithm to accurately measure the upper limb joints using only an accelerometer placed onto the upper arm. METHODS: The proposed algorithm is based on the inverse of the augmented Jaciobian as the algorithm (Papaleo, et al., Med Biol Eng Comput 53(9):815-28, 2015). However, the estimation of the elbow joint location is performed through the computation of the rotation measured by the accelerometer during the arm movement, making the algorithm more robust against shoulder movements. Furthermore, we present a method to compute the initial configuration of the upper limb necessary to start the integration method, a protocol to manually measure the upper arm and forearm lengths, and a shoulder position estimation. An optoelectronic system was used to test the accuracy of the proposed algorithm whilst healthy subjects were performing upper limb movements holding the end effector of the seven Degrees of Freedom (DoF) robot. In addition, the previous and the proposed algorithms were studied during a neuro-rehabilitation therapy assisted by the 'PUPArm' planar robot with three post-stroke patients. RESULTS: The proposed algorithm reports a Root Mean Square Error (RMSE) of 2.13cm in the elbow joint location and 1.89cm in the wrist joint location with high correlation. These errors lead to a RMSE about 3.5 degrees (mean of the seven joints) with high correlation in all the joints with respect to the real upper limb acquired through the optoelectronic system. Then, the estimation of the upper limb joints through both algorithms reveal an instability on the previous when shoulder movement appear due to the inevitable trunk compensation in post-stroke patients. CONCLUSIONS: The proposed algorithm is able to accurately estimate the human upper limb joints during a neuro-rehabilitation therapy assisted by end-effector robots. In addition, the implemented protocol can be followed in a clinical environment without optoelectronic systems using only one accelerometer attached in the upper arm. Thus, the ROM can be perfectly determined and could become an objective assessment parameter for a comprehensive assessment.
引用
- Bertomeu-Motos A, Blanco A, Badesa FJ, et al. Human arm joints reconstruction algorithm in rehabilitation therapies assisted by end-effector robotic devices. J Neuroeng Rehabil. 2018. PMID: 29458397. doi:10.1186/s12984-018-0348-0
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。