文献速递神经康复脊髓损伤康复

使用机器人步态训练器评估步行能力:脊髓损伤中按需辅助控制的机会与局限

Assessing walking ability using a robotic gait trainer: opportunities and limitations of assist-as-needed control in spinal cord injury.
PubMed 文献 · J Neuroeng Rehabil · 2023-09-21

该研究提出一种用于Lokomat的自适应按需辅助(AAN)控制软件,根据患者跟随屏幕步态模式的能力降低设备支持(体重支撑和机器人关节阻抗)。基于摆动末期机器人膝关节刚度的线性模型可解释步行患者10MWT变异的74%和TUG变异的61%,相对信度好但绝对信度差;加入最大髋屈肌扭矩后解释变异超过85%。

要点

  • AAN控制器可用于不同损伤严重程度的脊髓损伤患者。
  • 摆动末期机器人膝关节刚度可解释步行患者10MWT变异的74%和TUG变异的61%。
  • 当前AAN软件尚未准备好用于临床评估,但可作为按需辅助训练整合。

核心结论

  • 新型AAN软件可量化患者在机器人步态训练中所需的支持,自适应软件可能实现更富挑战性的训练条件。
  • 当前实现尚未准备好用于临床评估,但该方法安全,可作为按需辅助训练而非评估整合。

研究设计与样本

  • 采用回归方法识别最能提供步行能力相关信息的机器人测量指标,并确定重测信度。
  • 检查结果是否可外推至非步行和未受损个体。

主要发现

  • AAN控制器可用于不同损伤严重程度的患者。
  • 基于摆动末期机器人膝关节刚度的线性模型可解释步行患者10MWT变异的74%和TUG变异的61%,相对信度好但绝对信度差。
  • 加入最大髋屈肌扭矩变量后,模型解释变异超过85%。
  • 该结果未外推至非步行或健全个体,其中站立相和蹬离相相关变量似乎更相关。

关键数值与推荐

  • 基于摆动末期机器人膝关节刚度的线性模型解释步行患者10MWT变异的74%和TUG变异的61%。
  • 加入最大髋屈肌扭矩后解释变异超过85%。

临床怎么用

  • AAN软件可用于量化脊髓损伤患者在机器人步态训练中所需的支持。
  • 自适应软件可能实现根据个体能力调整的更具挑战性的训练条件。
  • 当前实现尚不适用于临床评估,但可作为按需辅助训练整合。

局限性

  • 当前AAN实现尚未准备好用于临床评估。
  • 模型的解释力未外推至非步行或健全个体。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Walking impairments are a common consequence of neurological disorders and are assessed with clinical scores that suffer from several limitations. Robot-assisted locomotor training is becoming an established clinical practice. Besides training, these devices could be used for assessing walking ability in a controlled environment. Here, we propose an adaptive assist-as-needed (AAN) control for a treadmill-based robotic exoskeleton, the Lokomat, that reduces the support of the device (body weight support and impedance of the robotic joints) based on the ability of the patient to follow a gait pattern displayed on screen. We hypothesize that the converged values of robotic support provide valid and reliable information about individuals' walking ability. METHODS: Fifteen participants with spinal cord injury and twelve controls used the AAN software in the Lokomat twice within a week and were assessed using clinical scores (10MWT, TUG). We used a regression method to identify the robotic measure that could provide the most relevant information about walking ability and determined the test-retest reliability. We also checked whether this result could be extrapolated to non-ambulatory and to unimpaired subjects. RESULTS: The AAN controller could be used in patients with different injury severity levels. A linear model based on one variable (robotic knee stiffness at terminal swing) could explain 74% of the variance in the 10MWT and 61% in the TUG in ambulatory patients and showed good relative reliability but poor absolute reliability. Adding the variable 'maximum hip flexor torque' to the model increased the explained variance above 85%. This did not extend to non-ambulatory nor to able-bodied individuals, where variables related to stance phase and to push-off phase seem more relevant. CONCLUSIONS: The novel AAN software for the Lokomat can be used to quantify the support required by a patient while performing robotic gait training. The adaptive software might enable more challenging training conditions tuned to the ability of the individuals. While the current implementation is not ready for assessment in clinical practice, we could demonstrate that this approach is safe, and it could be integrated as assist-as-needed training, rather than as assessment. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT02425332.

来源:J Neuroeng Rehabil,查看原文。版权归原作者所有。

引用

  1. Maggioni S, Lünenburger L, Riener R, et al. Assessing walking ability using a robotic gait trainer: opportunities and limitations of assist-as-needed control in spinal cord injury. J Neuroeng Rehabil. 2023. PMID: 37735690. doi:10.1186/s12984-023-01226-4

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。