移动机器人平衡助手(MRBA):面向日常生活的步态辅助与跌倒干预机器人
MRBA 是一种步态辅助机器人与电动轮椅的混合设备,可在用户行走时跟随并提供骨盆支撑,并在失衡时转换为轮椅。研究纳入健康年轻受试者和一名脊髓损伤者,评估行走时下肢关节运动学变化及失衡检测算法的敏感性与特异性。结果显示使用 MRBA 时受试者步速降低、步长缩短、步态时间延长,脊髓损伤者步宽减小提示稳定性改善;失衡检测算法识别自我诱发跌倒的灵敏度超过 93%,误报率为 0%。
要点
- MRBA 是步态辅助与电动轮椅混合设备,可在日常活动中跟随用户并在失衡时提供骨盆支撑。
- 使用 MRBA 时健康受试者和脊髓损伤者均出现步速降低、步长缩短、步态时间延长及关节活动度减小。
- 失衡检测算法通过力传感器与校准阈值比较,识别自我诱发跌倒的灵敏度超过 93%,误报率为 0%。
核心结论
- MRBA 是首个面向家庭和社区场景设计的步态辅助机器人,虽然机器人的顺应性和失衡识别仍有改进空间,但研究展示了将步态辅助技术引入家庭的初步尝试。
研究设计与样本
- 研究开发了 MRBA 设备并开展实验,纳入健康年轻受试者和一名脊髓损伤者,使用空间参数映射评估机器人对行走时下肢关节运动学的影响,并通过计算灵敏度和特异性评估失衡检测算法识别正常行走和模拟跌倒的能力。
主要发现
- 健康受试者使用 MRBA 行走时速度更低、步长更小、步态时间更长。
- 脊髓损伤者出现类似变化,且步宽减小提示稳定性更好。
- 两组受试者均出现关节活动度减小。
- 失衡检测算法通过力传感器测量值与校准阈值比较,识别超过 93% 的自我诱发跌倒,误报率为 0%。
关键数值与推荐
- 失衡检测算法通过将力传感器测量值与校准阈值比较来识别跌倒,超过阈值即判定为跌倒。
临床怎么用
- MRBA 可在用户进行日常生活活动行走时跟随并提供骨盆区域支撑,在用户想坐下或通勤时可转换为轮椅。
局限性
- 机器人的顺应性和失衡识别仍有改进空间。
- 研究仅纳入健康年轻受试者和一名脊髓损伤者,未来需招募更多有平衡困难的受试者以进一步完善设备功能。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Aging degrades the balance and locomotion ability due to frailty and pathological conditions. This demands balance rehabilitation and assistive technologies that help the affected population to regain mobility, independence, and improve their quality of life. While many overground gait rehabilitation and assistive robots exist in the market, none are designed to be used at home or in community settings. METHODS: A device named Mobile Robotic Balance Assistant (MRBA) is developed to address this problem. MRBA is a hybrid of a gait assistive robot and a powered wheelchair. When the user is walking around performing activities of daily living, the robot follows the person and provides support at the pelvic area in case of loss of balance. It can also be transformed into a wheelchair if the user wants to sit down or commute. To achieve instability detection, sensory data from the robot are compared with a predefined threshold; a fall is identified if the value exceeds the threshold. The experiments involve both healthy young subjects and an individual with spinal cord injury (SCI). Spatial Parametric Mapping is used to assess the effect of the robot on lower limb joint kinematics during walking. The instability detection algorithm is evaluated by calculating the sensitivity and specificity in identifying normal walking and simulated falls. RESULTS: When walking with MRBA, the healthy subjects have a lower speed, smaller step length and longer step time. The SCI subject experiences similar changes as well as a decrease in step width that indicates better stability. Both groups of subjects have reduced joint range of motion. By comparing the force sensor measurement with a calibrated threshold, the instability detection algorithm can identify more than 93% of self-induced falls with a false alarm rate of 0%. CONCLUSIONS: While there is still room for improvement in the robot compliance and the instability identification, the study demonstrates the first step in bringing gait assistive technologies into homes. We hope that the robot can encourage the balance-impaired population to engage in more activities of daily living to improve their quality of life. Future research includes recruiting more subjects with balance difficulty to further refine the device functionalities.
引用
- Li L, Foo MJ, Chen J, et al. Mobile Robotic Balance Assistant (MRBA): a gait assistive and fall intervention robot for daily living. J Neuroeng Rehabil. 2023. PMID: 36859286. doi:10.1186/s12984-023-01149-0
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。