居家模块化脑机接口平台在颈段脊髓损伤案例中的设计与开发
本研究开发了一种便携、模块化、输入输出设备独立的脑机接口软件平台,并在一名C5 ASIA A颈段脊髓损伤受试者中完成居家实现。受试者通过植入式皮层电极采集信号,经轮椅固定迷你电脑与手机应用控制机械手套。结果显示居家照护者平均设置时间5.6±0.83分钟,14个月无重训练的运动想象分类器中位准确率为87.5±4.71%。
要点
- 居家BCI平台无需每日校准或技术人员在场,照护者平均设置时间5.6±0.83分钟。
- 14个月无重训练的运动想象分类器中位准确率为87.5±4.71%。
- 蓝牙数据传输平均延迟23±0.014毫秒,神经信号采集与解码平均耗时404.1毫秒。
核心结论
- 居家BCI系统可行,受试者可通过友好的移动用户界面无缝操作,且无需每日校准或技术人员在场设置。
研究设计与样本
- 本研究为案例研究,受试者为一名C5 ASIA A颈段脊髓损伤患者。
- BCI平台包括Activa PC + S发生器、两个硬膜下四触点电极、固定于轮椅的迷你电脑、定制手机应用和机械手套。
- 量化指标包括居家系统设置时间、14个月解码准确率、硬件软件分析和蓝牙通信延迟。
主要发现
- 迷你电脑与手机应用间平均蓝牙数据传输延迟为23±0.014毫秒。
- 受试者照护者平均设置时间为5.6±0.83分钟。
- 神经信号采集与解码平均时间分别为404.1毫秒和1.02毫秒。
- 14个月无重训练的运动想象分类器中位准确率为87.5±4.71%。
临床怎么用
- 居家BCI系统采用模块化设计,可即插即用多种末端执行器,供用户根据日常需求选择。
- 系统无需每日校准,照护者经简单设置即可使用,降低了居家部署的技术门槛。
局限性
- 本研究为单例案例研究,结论的普适性需进一步验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
OBJECTIVE: The objective of this study was to develop a portable and modular brain-computer interface (BCI) software platform independent of input and output devices. We implemented this platform in a case study of a subject with cervical spinal cord injury (C5 ASIA A). BACKGROUND: BCIs can restore independence for individuals with paralysis by using brain signals to control prosthetics or trigger functional electrical stimulation. Though several studies have successfully implemented this technology in the laboratory and the home, portability, device configuration, and caregiver setup remain challenges that limit deployment to the home environment. Portability is essential for transitioning BCI from the laboratory to the home. METHODS: The BCI platform implementation consisted of an Activa PC + S generator with two subdural four-contact electrodes implanted over the dominant left hand-arm region of the sensorimotor cortex, a minicomputer fixed to the back of the subject's wheelchair, a custom mobile phone application, and a mechanical glove as the end effector. To quantify the performance for this at-home implementation of the BCI, we quantified system setup time at home, chronic (14-month) decoding accuracy, hardware and software profiling, and Bluetooth communication latency between the App and the minicomputer. We created a dataset of motor-imagery labeled signals to train a binary motor imagery classifier on a remote computer for online, at-home use. RESULTS: Average bluetooth data transmission delay between the minicomputer and mobile App was 23 ± 0.014 ms. The average setup time for the subject's caregiver was 5.6 ± 0.83 min. The average times to acquire and decode neural signals and to send those decoded signals to the end-effector were respectively 404.1 ms and 1.02 ms. The 14-month median accuracy of the trained motor imagery classifier was 87.5 ± 4.71% without retraining. CONCLUSIONS: The study presents the feasibility of an at-home BCI system that subjects can seamlessly operate using a friendly mobile user interface, which does not require daily calibration nor the presence of a technical person for at-home setup. The study also describes the portability of the BCI system and the ability to plug-and-play multiple end effectors, providing the end-user the flexibility to choose the end effector to accomplish specific motor tasks for daily needs. Trial registration ClinicalTrials.gov: NCT02564419. First posted on 9/30/2015.
引用
- Davis KC, Meschede-Krasa B, Cajigas I, et al. Design-development of an at-home modular brain-computer interface (BCI) platform in a case study of cervical spinal cord injury. J Neuroeng Rehabil. 2022. PMID: 35659259. doi:10.1186/s12984-022-01026-2
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。