宫颈癌放疗射野孔径的自动验证
本研究基于255例临床可接受计划的射野孔径与数字重建放射图像训练深度学习模型,生成验证射野孔径,并与80例治疗计划的射野孔径进行空间比较。结果显示,医师评为可接受的射野孔径与验证射野孔径的一致性显著优于不可接受者(P < .01),各比较指标的曲线下面积为0.89至0.95。该技术可有效标记治疗计划审核中可能不可接受的射野孔径。
要点
- 深度学习生成验证射野孔径用于自动质量核查。
- 可接受射野孔径与验证孔径一致性显著更优(P < .01)。
- 各指标ROC曲线下面积为0.89至0.95。
核心结论
- 自动验证射野孔径的技术可有效标记治疗计划审核中可能不可接受的射野孔径,并计划临床部署为全自动治疗计划工具和自动计划质量保证程序的一部分。
研究设计与样本
- 使用255例医师评为临床可接受计划的射野孔径与数字重建放射图像训练深度学习模型以生成验证射野孔径。
- 在80例治疗计划(57例医师评为临床可接受、23例评为临床不可接受)的射野孔径上测试质量验证技术。
主要发现
- 医师评为可接受的射野孔径与验证射野孔径的一致性显著优于评为不可接受的射野孔径(P < .01)。
- 受试者工作特征分析显示,所有比较指标(平均表面距离、Hausdorff距离、Dice相似系数)的曲线下面积为0.89至0.95。
关键数值与推荐
- 比较指标包括平均表面距离、Hausdorff距离和Dice相似系数。
- 可接受与不可接受射野孔径的组间比较P < .01。
- 所有比较指标的曲线下面积为0.89至0.95。
临床怎么用
- 该技术可作为治疗计划审核过程中标记可能不可接受射野孔径的工具,并计划整合入全自动治疗计划工具和自动计划质量保证程序。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Automated tools can help identify radiation treatment plans of unacceptable quality. To this end, we developed a quality verification technique to automatically verify the clinical acceptability of beam apertures for 4-field box treatments of patients with cervical cancer. By comparing the beam apertures to be used for treatment with a secondary set of beam apertures developed automatically, this quality verification technique can flag beam apertures that may need to be edited to be acceptable for treatment. METHODS AND MATERIALS: The automated methodology for creating verification beam apertures uses a deep learning model trained on beam apertures and digitally reconstructed radiographs from 255 clinically acceptable planned treatments (as rated by physicians). These verification apertures were then compared with the treatment apertures using spatial comparison metrics to detect unacceptable treatment apertures. We tested the quality verification technique on beam apertures from 80 treatment plans. Each plan was rated by physicians, where 57 were rated clinically acceptable and 23 were rated clinically unacceptable. RESULTS: Using various comparison metrics (the mean surface distance, Hausdorff distance, and Dice similarity coefficient) for the 2 sets of beam apertures, we found that treatment beam apertures rated acceptable had significantly better agreement with the verification beam apertures than those rated unacceptable (P < .01). Upon receiver operating characteristic analysis, we found the area under the curve for all metrics to be 0.89 to 0.95, which demonstrated the high sensitivity and specificity of our quality verification technique. CONCLUSIONS: We found that our technique of automatically verifying the beam aperture is an effective tool for flagging potentially unacceptable beam apertures during the treatment plan review process. Accordingly, we will clinically deploy this quality verification technique as part of a fully automated treatment planning tool and automated plan quality assurance program.
引用
- Kisling K, Cardenas C, Anderson BM, et al. Automatic Verification of Beam Apertures for Cervical Cancer Radiation Therapy. Pract Radiat Oncol. 2020. PMID: 32450365. doi:10.1016/j.prro.2020.05.001
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。