文献速递放疗物理与技术

事件学习与失效模式及效应分析融合实现数据驱动的患者安全改进

The Fusion of Incident Learning and Failure Mode and Effects Analysis for Data-Driven Patient Safety Improvements.
PubMed 文献 · Pract Radiat Oncol · 2020-03-19

该研究回顾性分析了27个月内物理治疗计划质量保证中检测到的871例安全事件,将其分类为文档或计划构建错误,并使用简化TG-100严重度评分结合观察发生率量化风险。结果显示74.9%为低严重度、20.4%为中严重度、4.7%为高严重度,前5高风险类别中4类可通过预计划图表查房干预,部分类别可通过规划和QA流程的额外自动化干预。结论认为该方法利用现有事件学习即可生成可操作结果,无需完整FMEA。

要点

  • 27个月共记录871例安全事件,74.9%为低严重度、4.7%为高严重度。
  • 前5高风险类别中4类可通过预计划图表查房针对性干预。
  • 融合事件学习与简化TG-100评分可数据驱动定位最高风险错误类型。

核心结论

  • 对安全事件进行回顾性分类和风险分析,可使诊所设计有针对性的工作流程和质量保证变更,以减少高风险事件的发生。
  • 该方法利用许多诊所已在执行的事件学习工作,能高效分配事件严重度并生成可操作结果,无需完整的失效模式及效应分析。

研究设计与样本

  • 由4名临床物理师记录27个月期间在物理治疗计划质量保证中检测到的安全事件。
  • 事件先分为文档错误或计划构建错误两大类,再进一步分层为子类别直至可充分区分以进行分析。
  • 使用简化分辨率TG-100严重度评分结合观察发生率量化事件风险,并对最高风险类别考察干预策略。

主要发现

  • 研究期间共识别871例事件。
  • 652例(74.9%)为低严重度,178例(20.4%)为中严重度,41例(4.7%)为高严重度。
  • 排名前5的类别中有4类可通过预计划图表查房进行干预。
  • 若干类别可通过规划和QA流程中的额外自动化进行干预。

临床怎么用

  • 诊所可利用现有事件学习数据,结合简化TG-100严重度评分与观察发生率,对安全事件进行回顾性分类和风险排序。
  • 根据风险排序结果,优先针对最高风险类别设计预计划图表查房和规划/QA自动化等针对性干预。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: Incident learning is a critical part of the quality improvement process for all radiation therapy clinics. Failure mode and effects analysis has also been adopted as a hazard analysis method within the field of radiation oncology based on the recommendations of American Association of Physicists in Medicine Task Group 100. In this work, we demonstrate a fusion of these techniques that is efficient and transferrable to all types of clinics and that allows data-driven targeting of the highest risk error types. METHODS AND MATERIALS: Four clinical physicists recorded safety events detected during physics treatment plan quality assurance over a 27-month period. Events were sorted into the broad categories of either a documentation or plan construction error. Events were further stratified into subcategories until sufficiently discriminated against for analysis. Event risks were quantified using reduced-resolution TG-100 severity scores combined with observed occurrence rates. The highest risk categories were examined for intervention strategies. RESULTS: A total of 871 events were identified over the study period. Of these, 652 (74.9%) were classified as low severity, 178 (20.4%) as medium severity, and 41 (4.7%) as high severity. Four of the top 5 ranked categories could be targeted by a preplanning chart rounds. Several of the categories could be targeted by additional automation in the planning and QA processes. CONCLUSIONS: The retrospective classification and risk analysis of safety events allows clinics to design targeted workflow and quality assurance changes aimed at reducing the occurrence of high-risk events. The method presented here leverages incident learning efforts that many clinics are already performing, allows the severity of events to be efficiently assigned, and generates actionable results without requiring a complete failure mode and effects analysis.

来源:Pract Radiat Oncol,查看原文。版权归原作者所有。

引用

  1. Paradis KC, Naheedy KW, Matuszak MM, et al. The Fusion of Incident Learning and Failure Mode and Effects Analysis for Data-Driven Patient Safety Improvements. Pract Radiat Oncol. 2020. PMID: 32201319. doi:10.1016/j.prro.2020.02.015

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。