自适应步长算法提升质子宏观蒙特卡洛剂量计算效率
研究在质子宏观蒙特卡洛(pMMC)方法中引入自适应步长算法,以体素化几何实现快速准确的剂量计算。通过根据材料界面自适应选择平板尺寸,并在学术模体与头颈患者CT上验证。结果显示剂量差异在1%或1mm以内,效率较非自适应算法提升最高5.6倍,较Geant4提升最高284倍。
要点
- 自适应步长pMMC在学术模体上剂量差异在1%或1mm内,效率较非自适应提升最高5.6倍。
- 头颈患者CT上剂量差异在1%或1mm内,效率较非自适应提升最高3.4倍,较Geant4提升145倍。
- 侧向材料界面距离小于0.5mm时需自适应减小平板尺寸。
核心结论
- 自适应步长pMMC算法可提供与全MC模拟相当的剂量精度,同时显著提升计算效率。
研究设计与样本
- 在自主研发的局部到全局pMMC方法中扩展自适应步长算法,通过预模拟数据库采样传输参数。
- 自适应选择平板尺寸取决于质子纵向和侧向邻域的材料界面,并与非自适应pMMC及全MC模拟对比验证。
- 验证对象包括笔形束和宽束多种能量照射学术模体以及头颈患者CT。
主要发现
- 对于垂直于质子方向的材料界面,选择最近邻平板厚度在剂量精度和计算效率间取得最佳平衡。
- 侧向材料界面距离小于0.5mm时需自适应减小所选平板尺寸。
- 学术模体上剂量差异在1%或1mm以内,效率较非自适应算法提升最高5.6倍,较Geant4提升284倍。
- 头颈患者CT上剂量差异在1%或1mm以内,效率较非自适应算法提升最高3.4倍,较Geant4提升145倍。
临床怎么用
- 该算法可用于质子放疗中体素化几何的快速准确剂量计算,尤其适用于含复杂材料界面的头颈部病例。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To provide fast and accurate dose calculation in voxelized geometries for proton radiation therapy by implementing an adaptive step size algorithm in the proton macro Monte Carlo (pMMC) method. METHODS: The in-house developed local-to-global MMC method for proton dose calculation is extended with an adaptive step size algorithm for efficient proton transport through a voxelized geometry by sampling transport parameters from a pre-simulated database. Adaptive choice of an adequate slab size in dependence of material interfaces in the proton's longitudinal and lateral vicinity is investigated. The dose calculation algorithm is validated against the non-adaptive pMMC and full MC simulation for pencil and broad beams with various energies impinging on academic phantoms as well as a head and neck patient CT. RESULTS: For material interfaces perpendicular to a proton's direction, choice of nearest neighbor slab thickness shows best trade-off between dosimetric accuracy and calculation efficiency. Adaptive reduction of chosen slab size is shown to be required for material interfaces closer than 0.5 mm in lateral direction. For the academic phantoms, dose differences of within 1% or 1 mm compared to full Geant4 MC simulation are found, while achieving an efficiency gain of up to a factor of 5.6 compared to the non-adaptive algorithm and 284 compared to Geant4. For the head and neck patient CT, dose differences are within 1% or 1 mm with an efficiency gain factor of up to 3.4 compared to the non-adaptive algorithm and 145 compared to Geant4. CONCLUSION: An adaptive step size algorithm for proton macro Monte Carlo was implemented and evaluated. The dose calculation provides the accuracy of full MC simulations, while achieving an efficiency gain factor of three compared to the non-adaptive algorithm and two orders of magnitude compared to full MC for a complex patient CT.
引用
- Kueng R, Frei D, Volken W, et al. Adaptive step size algorithm to increase efficiency of proton macro Monte Carlo dose calculation. Radiat Oncol. 2019. PMID: 31500647. doi:10.1186/s13014-019-1362-5
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。