利用3D扫描与打印制作头颈部放疗个性化口腔支架
该研究回顾性纳入3例接受头颈部放疗并佩戴张口压舌(MOTD)支架的患者,比较CT扫描分割与3D扫描牙模两种数字印模获取方法。结果显示3D扫描法耗时减少超过60%(p<0.0001),可重复性DSC显著更高(p<0.001),打印支架的贴合真实度与牙解剖精度也显著更优;自动配准误差<0.001 mm。作者据此建立了一套高效的口腔支架数字化定制与3D打印工作流。
要点
- 3D扫描牙模法较CT分割法耗时减少超过60%(p<0.0001)。
- 3D扫描法可重复性DSC显著高于CT法(p<0.001)。
- 3D扫描法制作的支架贴合真实度与牙解剖精度显著更优。
核心结论
- 研究建立了一套用于个性化设计并3D打印MOTD放疗支架的高效工作流,较CT来源分割方法有明显改进。
- 该快速高效的数字工作流有望让缺乏传统制作支持的单位也能使用这类减少毒性的装置。
研究设计与样本
- 回顾性纳入3例接受头颈部原发肿瘤放疗并佩戴MOTD支架的患者。
- 比较两种获取患者牙齿数字印模的方法:CT扫描分割法与对常规支架制作过程中所制咬合石膏模型进行3D扫描法。
- 由3名独立观察者重复获取数字印模以设计个性化MOTD支架,并评估耗时、可重复性DSC与3D打印支架精度。
- 对3D扫描法还评估了手动与自动配准过程。
主要发现
- 所有患者中,3D扫描法在耗时上显著优于CT扫描法,时间消耗减少超过60%(p<0.0001)。
- 3D扫描法的可重复性DSC显著更高(p<0.001)。
- 在咬合牙石模型上测试打印支架,3D扫描法制作的MOTD支架贴合真实度与牙解剖精度显著更好。
- 自动配准较手动配准精度更高,误差<0.001 mm。
关键数值与推荐
- 3D扫描法较CT法耗时减少超过60%(p<0.0001)。
- 3D扫描法可重复性DSC显著更高(p<0.001)。
- 自动配准误差<0.001 mm,优于手动配准。
临床怎么用
- 头颈部放疗前可采用3D扫描患者咬合石膏模型获取数字印模,替代CT分割法以缩短制作时间并提高可重复性。
- 打印支架可在咬合牙石模型上验证贴合真实度与牙解剖精度。
- 配准环节优先采用自动配准以获得更高精度。
- 该工作流可推广至目前缺乏传统支架制作支持的单位,以扩大减少毒性装置的临床应用。
局限性
- 研究为回顾性、仅纳入3例患者,样本量小。
- 摘要未报告患者肿瘤部位、放疗剂量及支架临床结局等细节。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: To evaluate and establish a digital workflow for the custom designing and 3D printing of mouth opening tongue-depressing (MOTD) stents for patients receiving radiotherapy for head and neck cancer. METHODS: We retrospectively identified 3 patients who received radiation therapy (RT) for primary head and neck cancers with MOTD stents. We compared two methods for obtaining the digital impressions of patients' teeth. The first method involved segmentation from computed tomography (CT) scans, as previously established by our group, and the second method used 3D scanning of the patients' articulated stone models that were made during the conventional stent fabrication process. Three independent observers repeated the process to obtain digital impressions which provided data to design customized MOTD stents. For each method, we evaluated the time efficiency, dice similarity coefficient (DSC) for reproducibility, and the 3D printed stents' accuracy. For the 3D scanning method, we evaluated the registration process using manual and automatic approaches. RESULTS: For all patients, the 3D scanning method demonstrated a significant advantage over the CT scanning method in terms of time efficiency with over 60% reduction in time consumed (p < 0.0001) and reproducibility with significantly higher DSC (p < 0.001). The printed stents were tested over the articulated dental stone models, and the trueness of fit and accuracy of dental anatomy was found to be significantly better for MOTD stents made using the 3D scanning method. The automated registration showed higher accuracy with errors < 0.001 mm compared to manual registration. CONCLUSIONS: We developed an efficient workflow for custom designing and 3D-printing MOTD radiation stents. This workflow represents a considerable improvement over the CT-derived segmentation method. The application of this rapid and efficient digital workflow into radiation oncology practices can expand the use of these toxicity sparing devices to practices that do not currently have the support to make them.
引用
- Zaid M, Bajaj N, Burrows H, et al. Creating customized oral stents for head and neck radiotherapy using 3D scanning and printing. Radiat Oncol. 2019. PMID: 31426824. doi:10.1186/s13014-019-1357-2
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。