基于Velocity的自适应配准与融合用于小动物放射研究平台的分次立体定向放射外科
研究在C57BL6小鼠中比较两种工作流:Arm 1对3次CBCT分别进行MRI刚性融合并勾画GTV,Arm 2仅首次CBCT行MRI融合勾画GTV后经Velocity自适应配准生成其余GTV。结果显示俯卧-俯卧与俯卧-仰卧自适应融合的平均偏差均较小,结论认为该技术可在现有SARRP系统上高效实施fSRS计划。
要点
- Arm 2仅需一次MRI-CBCT融合,经Velocity自适应配准即可获得其余CBCT的GTV。
- 俯卧-俯卧自适应融合轴向、矢状、冠状面平均偏差分别为0.46、0.46、0.37 mm。
- 俯卧-仰卧自适应融合轴向、矢状、冠状面平均偏差分别为0.52、0.52、0.68 mm。
核心结论
- 基于Velocity的CBCT与勾画体积自适应融合允许仅使用一次MRI-CBCT融合进行高效的fSRS计划。
- 该技术可立即在当前SARRP系统上实施,利用现有临床治疗计划软件促进先进的临床前治疗范式。
研究设计与样本
- C57BL6小鼠接受3次锥形束CT(CBCT)扫描:2次俯卧位、第3次仰卧位。
- 选取小鼠转移性脑肿瘤模型的单次T1加权增强MRI序列用于MRI-CBCT配准和GTV识别。
- 比较两组:Arm 1对3次CBCT分别行MRI刚性融合并在每次上勾画GTV;Arm 2仅首次CBCT行MRI融合并勾画GTV,随后行基于Velocity的自适应配准。
- 首次CBCT及关联GTV从MuriPlan导出至Velocity;Arm 2中将首次俯卧CBCT分别与第二次俯卧和第三次仰卧CBCT融合,对初始CBCT行形变配准并将所得矩阵应用于勾画的GTV。
- 比较Arm 1与Arm 2所得的GTV。
主要发现
- 重复MRI融合与GTV勾画(Arm 1)对比基于Velocity的CBCT与GTV自适应融合(Arm 2),俯卧-俯卧自适应融合在轴向、矢状、冠状面的平均偏差±标准差分别为0.46±0.16、0.46±0.22、0.37±0.22 mm。
- 俯卧-仰卧自适应融合在轴向、矢状、冠状面的平均偏差±标准差分别为0.52±0.27、0.52±0.36、0.68±0.31 mm。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To implement Velocity-based image fusion and adaptive deformable registration to enable treatment planning for preclinical murine models of fractionated stereotactic radiosurgery (fSRS) using the small animal radiation research platform (SARRP). METHODS AND MATERIALS: C57BL6 mice underwent 3 unique cone beam computed tomography (CBCT) scans: 2 in the prone position and a third supine. A single T1-weighted post-contrast magnetic resonance imaging (MRI) series of a murine metastatic brain tumor model was selected for MRI-to-CBCT registration and gross tumor volume (GTV) identification. Two arms were compared: Arm 1, where we performed 3 individual MRI-to-CBCT fusions using rigid registration, contouring GTVs on each, and Arm 2, where the authors performed MRI-to-CBCT fusion and contoured GTV on the first CBCT followed by Velocity-based adaptive registration. The first CBCT and associated GTV were exported from MuriPlan (Xstrahl Life Sciences) into Velocity (Varian Medical Systems, Inc, Palo Alto, CA). In Arm 1, the second and third CBCTs were exported similarly along with associated GTVs (Arm 1), while in Arm 2, the first (prone) CBCT was fused separately to the second (prone) and third (supine) CBCTs, performing deformable registrations on initial CBCTs and applying resulting matrices to the contoured GTV. Resulting GTVs were compared between Arms 1 and 2. RESULTS: Comparing GTV overlays using repeated MRI fusion and GTV delineation (Arm 1) versus those of Velocity-based CBCT and GTV adaptive fusion (Arm 2), mean deviations ± standard deviation in the axial, sagittal, and coronal planes were 0.46 ± 0.16, 0.46 ± 0.22, and 0.37 ± 0.22 mm for prone-to-prone and 0.52 ± 0.27, 0.52 ± 0.36, and 0.68 ± 0.31 mm for prone-to-supine adaptive fusions, respectively. CONCLUSIONS: Velocity-based adaptive fusion of CBCTs and contoured volumes allows for efficient fSRS planning using a single MRI-to-CBCT fusion. This technique is immediately implementable on current SARRP systems, facilitating advanced preclinical treatment paradigms using existing clinical treatment planning software.
引用
- Black PJ, Smith DR, Chaudhary K, et al. Velocity-based Adaptive Registration and Fusion for Fractionated Stereotactic Radiosurgery Using the Small Animal Radiation Research Platform. Int J Radiat Oncol Biol Phys. 2018. PMID: 29891199. doi:10.1016/j.ijrobp.2018.04.067
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。