三维打印辅助铸造柔软定制硅胶bolus用于头颈部放疗
本研究开发了一种低成本、临床可行的三维打印辅助 workflow,用于制作患者特异性柔软定制硅胶bolus(SCSBs),并应用于7例头颈部(HN)肿瘤患者的电子或光子放疗。从模拟定位到治疗开始约需1周,制作占1-2个工作日;CT和剂量学特性与水相似,活体剂量测量证实剂量沉积符合计划,材料成本低于现有硬塑料bolus,所有患者耐受良好。
要点
- SCSBs制作从模拟定位到治疗开始约1周,制作占1-2个工作日。
- SCSBs的CT和剂量学特性与水相似,活体剂量测量符合计划。
- 材料成本低于现有三维打印硬塑料bolus,所有患者耐受良好。
核心结论
- SCSBs用于头颈部肿瘤临床放疗是可行且有效的。
研究设计与样本
- 开发三维打印部件制作SCSBs的方法,并在7例鼻、颊、眼或耳部病变的头颈部患者中用于电子或光子放疗。
主要发现
- 从模拟定位到放疗开始的总设计和制作时间约1周,制作占1-2个工作日,取决于bolus表面积、体积和复杂度。
- SCSBs的CT和剂量学特性与水相似,7例治疗患者的活体剂量测量证实剂量沉积符合计划剂量。
- 材料成本低于现有三维打印硬塑料bolus,所有患者在整个治疗期间耐受SCSBs。
临床怎么用
- SCSBs可作为头颈部浅表或复杂解剖部位放疗的个体化组织补偿物,制作周期约1周且成本较低。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: Custom tissue compensators provide dosimetric advantages for treating superficial or complex anatomy, but currently available fabrication technology is expensive or impractical for most clinical operations and yields compensators that are difficult for patients to tolerate. We aimed to develop an inexpensive, clinically feasible workflow for generating patient-specific, soft, custom silicone boluses (SCSBs) for head-and-neck (HN) radiation therapy. METHODS AND MATERIALS: We developed a method using 3-dimensional printed parts for generating SCSBs for the treatment of HN cancers. The clinical workflow for generation of SCSBs was characterized inclusive of patient simulation to treatment in terms of resource time and cost. Dosimetric properties such as percentage depth dose and dose profiles were measured for SCSBs using GaF films. Comprehensive measurements were also conducted on an HN phantom. SCSBs were generated and used for electron or photon based radiation treatments of 7 HN patients with lesions at nose, cheek, eye, or ears. In vivo dose measurements with optically simulated luminescence dosimeters were performed. RESULTS: Total design and fabrication time from patient simulation to radiation treatment start required approximately 1 week, with fabrication constituting 1 to 2 working days depending on bolus surface area, volume, and complexity. Computed tomography and dosimetric properties of the soft bolus were similar to water. In vivo dose measurements on 7 treated patients confirmed that the dose deposition conformed to planned doses. Material costs were lower than currently available hard plastic boluses generated with 3-dimensional printing technology. All treated patients tolerated SCSBs for the duration of therapy. CONCLUSIONS: Generation and use of SCSBs for clinical use is feasible and effective for the treatment of HN cancers.
引用
- Chiu T, Tan J, Brenner M, et al. Three-dimensional printer-aided casting of soft, custom silicone boluses (SCSBs) for head and neck radiation therapy. Pract Radiat Oncol. 2017. PMID: 29452869. doi:10.1016/j.prro.2017.11.001
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。