前列腺癌MR-only模拟定位与计划的临床工作流程
该研究描述了在前列腺癌患者中实施MR-only模拟定位与计划的工作流程细节与经验。MR-only模拟定位与计划在临床环境中可行,靶区勾画、计划和治疗摆位定位精度等同或优于CT+MR流程。
要点
- 6例因髋关节假体或体型超出几何保真度QA标准未纳入MR-only流程。
- MR模拟定位较CT+MR模拟定位总共节省约15分钟。
核心结论
- MR-only模拟定位与计划在临床环境中可行,靶区勾画、计划和治疗摆位定位精度等同或优于CT+MR流程。
研究设计与样本
- MR采集包括T2w轴位、冠状位、矢状位用于勾画,3D FFE用于合成CT生成,3D bFFE用于标记点识别,总采集时间25分钟。
- 使用商用软件MRCAT在控制台生成合成CT,并进行了外部激光定位系统QA(<2 mm)和几何保真度QA(左右50 cm、前后30 cm范围内<2 mm)作为验收测试。
- 使用MIM™工作流程创建了自动化的逐步勾画流程,治疗摆位通过将MRCAT DRR与基于标记点ROI或骨骼的正交KV摄影进行匹配来实现。
- 采集3-D CBCT并与MR/合成CT比较,以评估直肠和膀胱充盈情况与模拟条件的差异。
主要发现
- 其余6例患者因髋关节假体或体型超出几何保真度QA标准而未纳入MR-only模拟定位。
- 与CT+MR模拟定位相比,MR模拟定位总共节省约15分钟。
- 自动化的MIM工作流程使MR图像勾画比CT+MR联合图像更简单、快速和准确,因为正常结构的时间变化最小。
- 基于骨骼/标记点使用MRCAT参考图像的2D和3D治疗摆位定位在所有病例中成功实现。
关键数值与推荐
- 外部激光定位系统QA标准:<2 mm。
- 几何保真度QA标准:左右50 cm和前后30 cm范围内<2 mm。
- MR总采集时间:25分钟。
临床怎么用
- 前列腺癌患者可考虑采用MR-only模拟定位与计划工作流程,以缩短模拟时间并可能提高勾画准确性。
- 实施前需进行外部激光定位系统QA(<2 mm)和几何保真度QA(左右50 cm、前后30 cm范围内<2 mm)并设定基线值。
- 髋关节假体或体型超出几何保真度QA标准的患者不适合MR-only模拟定位。
- 治疗摆位可通过将MRCAT DRR与基于标记点ROI或骨骼的正交KV摄影匹配来实现。
- 使用3-D CBCT与MR/合成CT比较可评估直肠和膀胱充盈情况与模拟条件的差异。
局限性
- 研究未报告剂量学目标的详细数值和统计比较结果。
- 未报告患者临床结局或长期随访数据。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To describe the details and experience of implementing a MR-only workflow in the clinic for simulation and planning of prostate cancer patients. METHODS: Forty-eight prostate cancer patients from June 2016 - Dec 2016 receiving external beam radiotherapy were scheduled to undergo MR-only simulation. MR images were acquired for contouring (T2w axial, coronal, sagittal), synthetic-CT generation (3D FFE-based) and fiducial identification (3D bFFE-based). The total acquisition time was 25 min. Syn-CT was generated at the console using commercial software called MRCAT. As part of acceptance testing of the MRCAT package, external laser positioning system QA (< 2 mm) and geometric fidelity QA (< 2 mm within 50 cm LR and 30 cm AP) were performed and baseline values were set. Our current combined CT + MR simulation process was modified to accommodate a MRCAT-based MR-only simulation workflow. An automated step-by-step process using a MIM™ workflow was created for contouring on the MR images. Patient setup for treatment was achieved by matching the MRCAT DRRs with the orthogonal KV radiographs based on either fiducial ROIs or bones. 3-D CBCTs were acquired and compared with the MR/syn-CT to assess the rectum and bladder filling compared to simulation conditions. RESULTS: Forty-two patients successfully underwent MR-only simulation and met all of our institutional dosimetric objectives that were developed based on a CT + MR-based workflow. The remaining six patients either had a hip prosthesis or their large body size fell outside of the geometric fidelity QA criteria and thus they were not candidates for MR-only simulation. A total time saving of ~15 min was achieved with MR-based simulation as compared to CT + MR-based simulation. An automated and organized MIM workflow made contouring on MR much easier, quicker and more accurate compared with combined CT + MR images because the temporal variations in normal structure was minimal. 2D and 3D treatment setup localization based on bones/fiducials using a MRCAT reference image was successfully achieved for all cases. CONCLUSIONS: MR-only simulation and planning with equivalent or superior target delineation, planning and treatment setup localization accuracy is feasible in a clinical setting. Future work will focus on implementing a robust 3D isotropic acquisition for contouring.
引用
- Tyagi N, Fontenla S, Zelefsky M, et al. Clinical workflow for MR-only simulation and planning in prostate. Radiat Oncol. 2017. PMID: 28716090. doi:10.1186/s13014-017-0854-4
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。