文献速递放疗物理与技术

直线加速器质量保证失效模式与效应分析的定量方法

Quantitative Approach to Failure Mode and Effect Analysis for Linear Accelerator Quality Assurance.
PubMed 文献 · Int J Radiat Oncol Biol Phys · 2017-01-24

本研究提出一种定量失效模式与效应分析方法,利用九年直线加速器QA记录中的故障发生率数据,并通过将相应误差引入头颈部调强放疗计划来建模测试失败的严重程度。结果显示,输出和激光测试的故障发生率最高,而每日 imaging QA 的失败严重程度最大;复合排序建议非 SRS/SBRT 加速器每日执行输出和激光测试、每周执行 imaging 与治疗等中心及 imaging 定位/重定位测试、每两周执行光距指示器和光野与射野一致性测试。

要点

  • 输出和激光测试故障发生率最高,建议每日执行。
  • imaging QA 失败严重程度最大,建议每周执行相关测试。
  • 非 SRS/SBRT 加速器可每两周执行 ODI 和光野与射野一致性测试。

核心结论

  • 失效模式与效应分析可用于确定 TG-142 中各 QA 测试的相对重要性,并基于风险优先数建议测试频率。

研究设计与样本

  • 基于九年直线加速器 QA 记录获取故障发生率,并通过将相应误差引入头颈部调强放疗计划来建模测试失败的严重程度。

主要发现

  • 每日 imaging QA 的失败严重程度最大,涉及 imaging 与治疗等中心以及 imaging 定位/重定位。
  • 输出和激光测试的故障发生率最高。
  • 复合排序结果建议非 SRS/SBRT 加速器每日执行输出和激光测试、每周执行 imaging 与治疗等中心及 imaging 定位/重定位测试、每两周执行光距指示器和光野与射野一致性测试。

关键数值与推荐

  • 非 SRS/SBRT 直线加速器:输出和激光测试每日执行。
  • 非 SRS/SBRT 直线加速器:imaging 与治疗等中心及 imaging 定位/重定位测试每周执行。
  • 非 SRS/SBRT 直线加速器:光距指示器和光野与射野一致性测试每两周执行。

临床怎么用

  • 可根据本机构故障发生率和测试失败严重程度,参考复合排序结果优化 TG-142 QA 测试频率。
  • 在时间有限时优先保障输出、激光和 imaging 相关测试的执行频率。

局限性

  • 研究基于单一机构的九年 QA 记录,结果可能受机构特异性影响。
  • 失败严重程度仅通过头颈部调强放疗计划建模,未涵盖其他治疗技术。
  • 建议频率仅针对非 SRS/SBRT 直线加速器。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: To determine clinic-specific linear accelerator quality assurance (QA) TG-142 test frequencies, to maximize physicist time efficiency and patient treatment quality. METHODS AND MATERIALS: A novel quantitative approach to failure mode and effect analysis is proposed. Nine linear accelerator-years of QA records provided data on failure occurrence rates. The severity of test failure was modeled by introducing corresponding errors into head and neck intensity modulated radiation therapy treatment plans. The relative risk of daily linear accelerator QA was calculated as a function of frequency of test performance. RESULTS: Although the failure severity was greatest for daily imaging QA (imaging vs treatment isocenter and imaging positioning/repositioning), the failure occurrence rate was greatest for output and laser testing. The composite ranking results suggest that performing output and lasers tests daily, imaging versus treatment isocenter and imaging positioning/repositioning tests weekly, and optical distance indicator and jaws versus light field tests biweekly would be acceptable for non-stereotactic radiosurgery/stereotactic body radiation therapy linear accelerators. CONCLUSIONS: Failure mode and effect analysis is a useful tool to determine the relative importance of QA tests from TG-142. Because there are practical time limitations on how many QA tests can be performed, this analysis highlights which tests are the most important and suggests the frequency of testing based on each test's risk priority number.

来源:Int J Radiat Oncol Biol Phys,查看原文。版权归原作者所有。

引用

  1. O'Daniel JC, Yin FF. Quantitative Approach to Failure Mode and Effect Analysis for Linear Accelerator Quality Assurance. Int J Radiat Oncol Biol Phys. 2017. PMID: 28587053. doi:10.1016/j.ijrobp.2017.01.035

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。