资源有限地区宫颈癌图像引导近距离放疗的实施:资源与工作流程影响的国际多中心横断面研究
该国际多中心横断面研究分析了14个国家代表性中心的365条近距离放疗工作流程,发现标准三维图像引导近距离放疗最常见(51%),先进三维技术显著延长操作时间并增加资源使用;使用镇静替代全麻可缩短流程中位35分钟;基于国家宫颈癌发病率的近距离放疗机器需求范围为0.2至9.5。研究提供了资源与情境特异性的图像引导近距离放疗过渡建议。
要点
- 标准三维图像引导近距离放疗是最常见的工作流程(51%)。
- 先进三维工作流程的操作时间中位达4小时16分钟,显著长于二维和标准三维。
- 使用镇静替代全麻可缩短工作流程中位35分钟。
核心结论
- 近距离放疗工作流程差异大,先进工作流程显著增加操作时间和资源使用。
- 通过麻醉选择、成像策略和计划流程优化可提高效率,情境特异性策略对图像引导近距离放疗过渡至关重要。
研究设计与样本
- 国际多中心横断面研究,分析14个国家代表性中心的365条近距离放疗工作流程。
- 使用标准化表格收集基础设施、治疗工作流程、操作时间、麻醉、成像和治疗计划数据,并收集国家近距离放疗资源数据。
主要发现
- 工作流程B(标准三维图像引导近距离放疗)最常见,占51%。
- 工作流程A、B、C的操作时间中位数分别为2小时08分钟(IQR 1小时7分钟)、2小时35分钟(IQR 1小时51分钟)、4小时16分钟(IQR 2小时33分钟)。
- 使用镇静替代全麻可缩短工作流程中位35分钟。
- 基于国家宫颈癌发病率的近距离放疗机器需求范围为0.2至9.5;4个国家需求低(<0.5),2个国家中等(0.5-1.0),8个国家需求高(>1.0)。
关键数值与推荐
- 工作流程A定义为传统二维X射线引导近距离放疗,基于A点分次计划并使用二维X射线成像。
- 工作流程B定义为标准腔内三维图像引导近距离放疗,分次计划使用CT或MR成像并基于体积处方。
- 工作流程C定义为先进三维图像引导近距离放疗,分次使用先进腔内或腔内-组织间技术,计划使用CT或MR成像并基于体积处方。
临床怎么用
- 在资源有限地区实施图像引导近距离放疗时,可考虑使用镇静替代全麻以缩短工作流程时间。
- 应根据本地资源和国家需求选择成像策略和计划工作流程,优化效率以促进图像引导近距离放疗过渡。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Use of image-guided brachytherapy (IGBT) in cervical cancer improves patient outcomes. However, implementation in resource-limited settings is challenging due to limited capacity upscale, absence of workflow enhancement strategies, and financial barriers. Optimizing workflows is essential, yet the relationship between workflow efficiency and IGBT uptake remains unclear. METHODS: This cross-sectional study examined brachytherapy (BT) workflows across 14 nationally representative centers. Standardized forms collected data on infrastructure, treatment workflows ((A): Conventional two-dimensional (2D) X-Ray-Guided BT, with point-A-based fractions planned using 2D X-ray imaging, (B): Standard intracavitary (IC) three-dimensional (3D) IGBT, with fractions planned using computed tomography (CT)- or magnetic resonance (MR)-based imaging with volume-based prescriptions, (C): Advanced 3D IGBT, with fractions delivered using advanced IC or intracavitary-interstitial (IC-IS) techniques and planned using CT- or MR-based imaging with volume-based prescriptions.)), procedural times, anesthesia, imaging, and treatment planning. National BT resource data was also collected. Recommendations were developed to optimize workflows and facilitate IGBT transition. FINDINGS: A total of 365 workflows were analyzed, wherein workflow B was most common (51%). Median procedure times were 2 hours 08 minutes (Interquartile range (IQR) 1 hour and 7 minutes), 2 hours 35 minutes (IQR 1 hour and 51 minutes), and 4 hours 16 minutes (IQR 2 hours and 33 minutes) for workflows A, B, and C, respectively. Using sedation instead of full anesthesia shortened workflows by a median of 35 minutes. BT machine demand, based on national cervical cancer incidence, ranged from 0.2 to 9.5; four countries had low (< 0.5), two moderate (0.5 - 1.0), and eight high demand (>1.0). Resource- and context-specific recommendations for IGBT transition were provided. INTERPRETATION: BT workflows varied widely. Substantially increased procedure times and resource use were observed with advanced workflows. Findings highlight opportunities to improve efficiency through anesthesia choice, imaging strategy, and planning workflow optimization. Implementing context-specific strategies will be crucial for IGBT transition. FUNDING: Funding from the XXXX, in collaboration with XXXX and participating sites.
引用
- Hande V, Ndarukwa S, Rubio AP, et al. Implementing Image-Guided Brachytherapy (IGBT) For Cervical Cancer in Resource-Limited Settings: An International Multicentric Cross-Sectional Study of Resource and Workflow Impact. Int J Radiat Oncol Biol Phys. 2026. PMID: 42962975. doi:10.1016/j.ijrobp.2026.10.028
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。