文献速递泌尿生殖与妇科肿瘤放疗放疗物理与技术

TROG 18.01 NINJA 试验中自动轮廓质控工具的实施

Implementation of an automated contour quality assurance tool within the TROG 18.01 NINJA trial.
PubMed 文献 · Radiother Oncol · 2025-11-07

该研究在 TROG 18.01 NINJA 前列腺癌试验中部署基于既有前列腺 CTV 质控模型的自动轮廓质控工具,18 个月试点评估 56 个 CTV。工具正确识别全部 5 例违反方案病例,敏感度 1.0,但假阳性率高于预期,准确度 0.46、特异度 0.41;引入分布外检测后分布内病例准确度提升至 0.69。

要点

  • 工具在试点中正确识别全部 5 例方案违背 CTV,敏感度 1.0。
  • 假阳性率高于预期,整体准确度 0.46、特异度 0.41。
  • 加入分布外检测后分布内病例准确度升至 0.69。

核心结论

  • 自动轮廓质控在多中心试验中可行,但部署时假阳性率高于预期,需分布外检测与流程自动化改进。

研究设计与样本

  • 基于既有前列腺 CTV 质控模型开发软件工具并整合进试验质控流程,开展 18 个月试点,评估 56 个 CTV。

主要发现

  • 全部 5 例违反方案的 CTV 被正确识别,敏感度 1.0;准确度 0.46、特异度 0.41。
  • 回顾分析显示许多提交病例偏离模型训练分布,主要因 MRI 采集不一致和提交 CTV 定义差异。
  • 基于直方图相关性与模型不确定性的分布外检测使分布内病例准确度提升至 0.69。
  • 放射肿瘤科医生报告每例最多节省 60 分钟,但质控协调员的数据准备仍耗时。

关键数值与推荐

  • 敏感度 1.0;准确度 0.46;特异度 0.41;加入分布外检测后分布内病例准确度 0.69;每例最多节省 60 分钟。

临床怎么用

  • 可将自动轮廓质控工具嵌入多中心试验质控流程,用报告标记需复核病例辅助放疗医生。
  • 部署前应评估提交数据与模型训练分布的一致性,并考虑加入分布外检测。
  • 需进一步自动化数据准备以减轻质控协调员负担。

局限性

  • 单臂试点、样本量 56 个 CTV,未设对照;假阳性率高于预期;数据准备仍耗时。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND AND PURPOSE: Automated contour quality assurance (QA) has the potential to reduce resource and cost requirements for clinical trial QA. While several studies have developed such models, few have been translated for use in prospective real-world trials. This study aimed to implement a contour QA tool using a previously developed model and evaluate its performance during deployment within the TROG 18.01 NINJA prostate cancer trial. MATERIALS AND METHODS: A software tool was developed using an existing prostate clinical target volume (CTV) QA model and integrated into the trial QA workflow. A pilot study was conducted over an 18-month period, during which 56 CTVs were assessed. Reports generated by the tool flagged cases for review and were provided to radiation oncologists to support QA processes. RESULTS: All five protocol-violating CTVs were correctly identified during deployment, yielding a sensitivity of 1.0. However, a higher-than-expected false positive rate resulted in an accuracy of 0.46 and specificity of 0.41. Retrospective analysis showed that many cases submitted deviated from the model's training distribution, primarily due to inconsistencies in MRI acquisition and variation in submitted CTV definitions. Incorporating out-of-distribution detection based on histogram correlation and model uncertainty improved accuracy to 0.69 for in-distribution cases. Radiation oncologists reported time savings of up to 60 min per case. However, preparation of data remained time intensive for QA coordinators, highlighting the need for further workflow automation. CONCLUSION: These findings support the feasibility of automated contour QA in multicentre trials and offer guidance for future implementation at scale.

来源:Radiother Oncol,查看原文。版权归原作者所有。

引用

  1. Chlap P, Min H, Martin J, et al. Implementation of an automated contour quality assurance tool within the TROG 18.01 NINJA trial. Radiother Oncol. 2025. PMID: 41207633. doi:10.1016/j.radonc.2025.111269

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。