文献速递头颈部肿瘤放疗放疗物理与技术

基于有限元分析的头颈部热塑膜开口模式研究

The investigation of opening modes of head and neck thermoplastic mask for radiotherapy based on finite element analysis.
PubMed 文献 · Radiat Oncol · 2025-04-29

该研究通过重建患者影像数据建立含10种不同开口模式的热塑膜有限元模型,分析不同载荷条件下开口位置对固定效果的影响,发现开口位置显著影响固定效果,其中前额区域开口对感兴趣区附近固定效果影响最大,临床设计前额开口时需审慎考虑。

要点

  • 开口位置在不同载荷条件下显著影响热塑膜固定效果。
  • 前额区域开口对感兴趣区附近固定效果影响最大。
  • 临床设计前额区域开口时应审慎考虑。

核心结论

  • 开口位置显著影响热塑膜在不同载荷条件下的固定效果,前额区域开口对感兴趣区附近固定效果影响最大,临床设计前额开口时应审慎考虑。

研究设计与样本

  • 基于患者影像数据重建,建立含10种不同开口模式的热塑膜有限元模型,并赋予不同厚度和材料属性,分析不同载荷条件下的位移分布。

主要发现

  • 不同开口模式在不同载荷条件下的位移分布不同,开口位置显著影响固定效果。
  • 前额区域开口对感兴趣区附近固定效果影响最大。

临床怎么用

  • 临床设计热塑膜前额区域开口时应审慎考虑。
  • 本研究为未来个性化定位治疗提供参考。

局限性

  • 原文未述局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Radiotherapy is a crucial treatment modality for head and neck tumors. Precise patient positioning is vital for ensuring the reproducibility and accuracy of the treatment. Clinically, thermoplastic head and neck masks are used for positioning, and patients often require openings in these masks. However, the relationship between opening locations and the fixation effectiveness of the masks has not been thoroughly studied. This study reconstructs a patient's imaging data to create finite element models with 10 different opening patterns. By assigning various thicknesses and material properties to the fixation masks, we analyzed the displacement distribution of different opening models under diverse loading conditions. The results indicate that the opening location significantly impacts fixation effectiveness under different loading conditions. In particular, the opening in the forehead area has the most significant impact on the fixation effect of the mask near the region of interest (ROI). Therefore, in clinical practice, the design of openings in the forehead area should be carefully considered. This study provides valuable insights into the fixation effectiveness of thermoplastic masks and serves as a reference for future personalized positioning treatments.

来源:Radiat Oncol,查看原文。版权归原作者所有。

引用

  1. Pang G, Lu Y, Xu Y, et al. The investigation of opening modes of head and neck thermoplastic mask for radiotherapy based on finite element analysis. Radiat Oncol. 2025. PMID: 40301880. doi:10.1186/s13014-025-02648-1

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。