文献速递中枢神经肿瘤放疗放疗物理与技术

伽玛刀放射外科中按数字剂量绘画治疗的治疗计划方法

Treatment Planning Methods for Dose Painting by Numbers Treatment in Gamma Knife Radiosurgery.
PubMed 文献 · Adv Radiat Oncol · 2024-05-01

本研究将不同参数的剂量绘画处方函数应用于10例样本病例,以体素图像强度转换为处方,评估伽玛刀立体定向放射外科剂量绘画治疗的计划质量。采用临床放置等中心配合半无限线性规划优化,并比较草火球填充算法与临床可用的Leksell伽玛计划等中心填充算法进行自动等中心放置,结果显示优化可获得高质量剂量绘画计划,计划质量受处方方法影响,多项式函数处方较S形函数处方可达到的计划质量更高,增加等中心数量可改善计划质量,多数病例优化计算求解时间在5分钟内。

要点

  • 优化可找到高质量剂量绘画计划,计划质量受剂量绘画处方方法影响。
  • 多项式函数处方较S形函数处方可达到的计划质量更高,即使在高平均剂量推量下亦如此。
  • 自动等中心放置是剂量绘画立体定向放射外科治疗的可行方法,增加等中心数量可改善计划质量。

核心结论

  • 优化和自动等中心放置被证明是获得高质量计划的可能的治疗计划方法。
  • 剂量绘画处方方法对可达到计划质量的影响在本研究中得到量化。

研究设计与样本

  • 研究对10例样本病例应用不同参数的剂量绘画处方函数,将体素图像强度转换为处方。
  • 使用临床放置等中心配合半无限线性规划公式进行优化,以研究可达到的计划质量和优化。
  • 自动等中心放置采用草火球球填充算法和临床可用的Leksell伽玛计划等中心填充算法。
  • 每个优化治疗计划的计划质量用剂量绘画立体定向放射外科指标测量。

主要发现

  • 优化可用于找到高质量剂量绘画计划,且计划质量受剂量绘画处方方法影响。
  • 多项式函数处方较S形函数处方显示更可达到的计划质量,即使在高平均剂量推量下亦如此。
  • 自动等中心放置被证明是剂量绘画立体定向放射外科治疗的可行方法,增加等中心数量可改善计划质量。
  • 多数病例优化计算求解时间在5分钟内,适合临床计划。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: Dose painting radiation therapy delivers a nonuniform dose to tumors to account for heterogeneous radiosensitivity. With recent and ongoing development of Gamma Knife machines making large-volume brain tumor treatments more practical, it is increasingly feasible to deliver dose painting treatments. The increased prescription complexity means automated treatment planning is greatly beneficial, and the impact of dose painting on stereotactic radiosurgery (SRS) plan quality has not yet been studied. This research investigates the plan quality achievable for Gamma Knife SRS dose painting treatments when using optimization techniques and automated isocenter placement in treatment planning. METHODS AND MATERIALS: Dose painting prescription functions with varying parameters were applied to convert voxel image intensities to prescriptions for 10 sample cases. To study achievable plan quality and optimization, clinically placed isocenters were used with each dose painting prescription and optimized using a semi-infinite linear programming formulation. To study automated isocenter placement, a grassfire sphere-packing algorithm and a clinically available Leksell gamma plan isocenter fill algorithm were used. Plan quality for each optimized treatment plan was measured with dose painting SRS metrics. RESULTS: Optimization can be used to find high quality dose painting plans, and plan quality is affected by the dose painting prescription method. Polynomial function prescriptions show more achievable plan quality than sigmoid function prescriptions even with high mean dose boost. Automated isocenter placement is shown as a feasible method for dose painting SRS treatment, and increasing the number of isocenters improves plan quality. The computational solve time for optimization is within 5 minutes in most cases, which is suitable for clinical planning. CONCLUSIONS: The impact of dose painting prescription method on achievable plan quality is quantified in this study. Optimization and automated isocenter placement are shown as possible treatment planning methods to obtain high quality plans.

来源:Adv Radiat Oncol,查看原文。版权归原作者所有。

引用

  1. Tham BZ, Aleman DM, Nordström H, et al. Treatment Planning Methods for Dose Painting by Numbers Treatment in Gamma Knife Radiosurgery. Adv Radiat Oncol. 2024. PMID: 39104874. doi:10.1016/j.adro.2024.101534

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。