文献速递姑息放疗与转移瘤放疗物理与技术

碳纤维固定硬件术后脊柱立体定向放疗中新型分次内运动追踪一例

Novel Intrafraction Motion Tracking During Postoperative Spine Stereotactic Irradiation for a Patient With Carbon Fiber Fixation Hardware.
PubMed 文献 · Pract Radiat Oncol · 2023-07-29

本文报道一例63岁子宫内膜癌患者因T12病理性骨折伴脊髓压迫行碳纤维加强聚醚醚酮硬件联合钽螺钉标记的T10-L2后路固定融合术,术后对T11-T12行3000 cGy分5次立体定向体部放疗,利用Varian TrueBeam分次内运动审查软件模块通过钽螺钉标记成功追踪分次内运动,全程分次内运动小于3 mm。此为碳纤维脊柱硬件联合钽标记用于每日脊柱立体定向治疗中分次内运动审查追踪的首次病例报告。

要点

  • 碳纤维加强聚醚醚酮硬件可减少金属伪影,改善术后脊柱放疗计划的可视化与准确性。
  • 本例使用带钽螺钉标记的碳纤维硬件,在TrueBeam分次内运动审查模块中成功识别并追踪标记。
  • 整个治疗过程中分次内运动均小于3 mm,作者指出未来需改进工作流程并建立脊柱专用分次内运动审查方案。

核心结论

  • 这是首例报道的碳纤维脊柱硬件联合钽标记在每日脊柱立体定向治疗中成功实现分次内运动审查追踪的病例。
  • 作者指出未来工作需要改进工作流程并创建脊柱专用的分次内运动审查方案。

研究设计与样本

  • 病例报告:一例63岁女性子宫内膜癌患者,因急性背痛就诊,影像显示T12病理性椎体骨折伴脊髓压迫。
  • 患者在本机构接受T12椎体切除术、环形减压及后路T10-L2融合术,使用带钽螺钉标记的碳纤维加强聚醚醚酮硬件,术后对T11-T12行3000 cGy分5次立体定向体部放疗。

主要发现

  • 放疗期间采集260 kV图像,分次内运动审查软件能够识别并追踪钽螺钉标记。
  • 整个治疗过程中分次内运动均小于3 mm。

关键数值与推荐

  • 术后立体定向体部放疗剂量为3000 cGy分5次,照射T11-T12。
  • 分次内运动追踪使用Varian TrueBeam分次内运动审查软件模块,通过钽螺钉标记实现。
  • 治疗期间分次内运动小于3 mm。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 作者指出未来工作需要改进工作流程并创建脊柱专用的分次内运动审查方案。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Carbon-fiber reinforced (CFR) polyetheretherketone hardware is an alternative to traditional metal hardware used for spinal fixation surgeries before postoperative radiation therapy for patients with spinal metastases. CFR hardware's radiolucency decreases metal artifact, improving visualization and accuracy of treatment planning. We present the first clinical use and proof of principle of CFR spinal hardware with tantalum markers used for successful tracking of intrafraction motion (IM) using Varian TrueBeam IMR (Intrafraction Motion Review) software module during postoperative spine stereotactic radiation. A 63-year-old woman with history of endometrial cancer presented with acute back pain. Imaging demonstrated pathologic T12 vertebral fracture with cord compression. She underwent T12 vertebrectomy with circumferential decompression and posterior instrumented T10-L2 fusion at our facility using CFR-polyetheretherketone hardware with tantalum screw markers followed by postoperative stereotactic body radiation therapy to 3000 cGy in 5 fractions delivered to T11-T12. Tantalum screw markers were used for IMR tracking. During irradiation, 260 kV images were acquired, and IMR software was able to identify and track markers. During the entire treatment, the IM motions were less than 3 mm. This is the first presented case of CFR spinal hardware with tantalum markers used for successful IMR tracking of IM during daily spine stereotactic treatment. Future work will be needed to improve workflow and create a spine-specific IMR protocol.

来源:Pract Radiat Oncol,查看原文。版权归原作者所有。

引用

  1. Lee-Poprocki H, Ritter AR, Upadhyay R, et al. Novel Intrafraction Motion Tracking During Postoperative Spine Stereotactic Irradiation for a Patient With Carbon Fiber Fixation Hardware. Pract Radiat Oncol. 2023. PMID: 37516957. doi:10.1016/j.prro.2023.06.007

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。