1.5特斯拉磁共振直线加速器上前列腺癌放疗分次内再计划亚分次工作流程的临床应用:减轻分次内运动的一种实用方法
本研究在1.5 T磁共振直线加速器上实现并临床应用亚分次工作流程,将每日剂量分为多个连续亚分次并各自适应最新解剖。15例前列腺癌患者接受5×7.25 Gy、分两个3.625 Gy亚分次(总计10×3.625 Gy)治疗。亚分次流程下分次内CTV平均3D位移为1.1 mm(±0.7),而单计划流程下高达3.5 mm(±2.4),所需PTV外扩相应减小。
要点
- 亚分次工作流程在15例前列腺癌患者中于1.5 T磁共振直线加速器上实施,每日剂量分两个亚分次。
- 亚分次流程下分次内CTV平均3D位移为1.1 mm(±0.7),单计划流程下高达3.5 mm(±2.4)。
- 计算所得PTV外扩为左右1.0 mm、头脚2.4 mm、前后2.6 mm,平均在床时间为42.7分钟。
核心结论
- 亚分次工作流程在15例于1.5 T磁共振直线加速器上接受两个亚分次治疗的前列腺癌患者中可行性得到验证。
- 该工作流程通过减少立体定向体部放疗中的系统性分次内运动,使这些患者的PTV外扩得以显著减小。
研究设计与样本
- 本研究为在1.5 T磁共振直线加速器上实现并临床应用亚分次工作流程的技术方法学研究。
- 15例前列腺癌患者接受5×7.25 Gy,分两个3.625 Gy亚分次给药(总计10×3.625 Gy)。
- 测定分次内临床靶区运动并与单计划投照工作流程比较,同时确定所需计划靶区外扩。
主要发现
- 亚分次工作流程下分次内3D CTV平均位移(±标准差)为1.1 mm(±0.7),单计划流程下高达3.5 mm(±2.4)。
- 亚分次下所需PTV外扩为左右1.0 mm、头脚2.4 mm、前后2.6 mm。
- 平均在床时间为42.7分钟,除两个分次外所有分次均在60分钟内完成。
关键数值与推荐
- 每个亚分次治疗计划均符合剂量约束,因此无需在线剂量累积。
- 成像与治疗计划与剂量投照并行执行以减少空闲时间。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Intrafraction motion during radiotherapy limits margin reduction and dose escalation. Magnetic resonance (MR)-guided linear accelerators (MR-Linac) have emphasised this issue by enabling intrafraction imaging. We present and clinically apply a new workflow to counteract systematic intrafraction motion during MR-guided stereotactic body radiotherapy (SBRT). MATERIALS AND METHODS: With the sub-fractionation workflow, the daily dose is delivered in multiple sequential parts (sub-fractions), each adapted to the latest anatomy. As each sub-fractionation treatment plan complies with the dose constraints, no online dose accumulation is required. Imaging and treatment planning are executed in parallel with dose delivery to minimise dead time, enabling an efficient workflow. The workflow was implemented on a 1.5 T MR-Linac and applied in 15 prostate cancer (PCa) patients treated with 5 × 7.25 Gy in two sub-fractions of 3.625 Gy (10 × 3.625 Gy in total). Intrafraction clinical target volume (CTV) motion was determined and compared to a workflow with single-plan delivery. Furthermore, required planning target volume (PTV) margins were determined. RESULTS: Average on-table time was 42.7 min. Except for two fractions, all fractions were delivered within 60 min. Average intrafraction 3D CTV displacement (±standard deviation) was 1.1 mm (± 0.7) with the sub-fractionation workflow, whereas this was up to 3.5 mm (± 2.4) without sub-fractionation. Calculated PTV margins required with sub-fractionation were 1.0 mm (left-right), 2.4 mm (cranial-caudal), and 2.6 mm (anterior-posterior). CONCLUSION: Feasibility of the sub-fractionation workflow was demonstrated in 15 PCa patients treated with two sub-fractions on a 1.5 T MR-Linac. The workflow allows for significant PTV margin reduction in these patients by reducing systematic intrafraction motion during SBRT.
引用
- Willigenburg T, Zachiu C, Bol GH, et al. Clinical application of a sub-fractionation workflow for intrafraction re-planning during prostate radiotherapy treatment on a 1.5 Tesla MR-Linac: A practical method to mitigate intrafraction motion. Radiother Oncol. 2022. PMID: 36113777. doi:10.1016/j.radonc.2022.09.004
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。