文献速递职业卫生

中国制造业工人和医务人员职业紧张核心量表常模初步建立

[A preliminary study on establishment of the Core Occupational Stress Scale (COSS) norms for manufacturing and medical workers in China].
PubMed 文献 · Zhonghua Yu Fang Yi Xue Za Zhi · 2020-01-01

该研究采用分层随机抽样,调查了7个省会市20家制造业企业的10 316名工人和4个省会市19家医院的5 031名医务人员,建立职业紧张核心量表(COSS)的均数、百分位和T分值常模,并以总分x̄+0.5s、x̄+s、x̄+1.5s划分职业紧张程度。研究给出了两类人群的COSS总分、百分位和T分范围及无、轻、中、重度职业紧张的判定界值。

要点

  • 制造业工人COSS总分均值为(45.48±8.16)分,医务人员为(45.71±8.46)分。
  • 制造业工人总分<50、50~53、54~57、>57分分别判定为无、轻、中、重度职业紧张。
  • 医务人员总分<50、50~54、55~58、>58分分别判定为无、轻、中、重度职业紧张。

核心结论

  • 所建立的制造业工人和医务人员COSS常模符合中国国情及心理学测量要求,可为职业心理健康促进提供理论支持与实践指导。

研究设计与样本

  • 采用分层随机抽样方法,从制造业高度聚集区域7个省会市20家制造业企业抽取制造业工人10 316名。
  • 从全国东、中、西部地区4个省会市19家医院抽取医务人员5 031名作为常模样本。

主要发现

  • 制造业工人COSS总分均值为(45.48±8.16)分,第50百分位数为46,T分常模范围为(15~92)分。
  • 医务人员COSS总分均值为(45.71±8.46)分,第50百分位数为46,T分常模范围为(16~91)分。

关键数值与推荐

  • 以COSS总分的x̄+0.5s、x̄+s、x̄+1.5s作为职业紧张程度划分标准。
  • 制造业工人COSS总分<50、50~53、54~57、>57分分别判定为无、轻度、中度、重度职业紧张。
  • 医务人员COSS总分<50、50~54、55~58、>58分分别判定为无、轻度、中度、重度职业紧张。

临床怎么用

  • 可使用本常模对制造业工人和医务人员的COSS总分进行职业紧张程度分级,辅助识别无、轻、中、重度职业紧张人群。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Objective: To establish the Core Occupational Stress Scale (COSS) norm values for manufacturing and medical workers. Methods: A total of 10 316 manufacturing workers of 20 companies from 7 provincial capital cities and 5 031 medical workers of 19 hospitals from 4 provincial capital cities were investigated using a stratified sampling method. Questionnaire information including occupational stress was collected. Norms of mean, percentile and T scores were calculated for COSS total and sub-dimension scores by different demographic characteristics. Based on the normal distribution, cut points of x¯+0.5s, x¯+s, x¯+1.5s of COSS total scores were calculated to classify the degree of occupational stress. Results: The COSS total scores were (45.48±8.16) and (45.71±8.46). The 50th percentiles were both 46, and T score ranges were (15-92) and (16-91), respectively, for manufacturing and medical workers. When the total score was<50, 50-53, 54-57, and >57 for manufacturing worker, or<50, 50-54, 55-58, and >58 for medical workers, occupational stress would be classified into none, mild, moderate, and severe levels. Conclusion: Compatible with the national condition of China, as well as the principles of psychological measurement, these norm values for manufacturing and medical workers could provide theoretical support and practical guideline on occupational mental health promotion. 目的: 研制适用于我国制造业工人和医务人员的职业紧张测量核心量表(COSS)得分常模。 方法: 采用分层随机抽样方法,从制造业高度聚集区域7个省会市20家制造业企业和全国东、中、西部地区4个省会市19家医院分别抽取制造业工人(10 316名)和医务人员(5 031名)作为常模样本。通过问卷收集职业紧张相关信息,并建立不同人口学特征对象的均数常模、百分位常模、T分值常模,同时采用正态分布法,以COSS总分的x¯+0.5s、x¯+s、x¯+1.5s作为职业紧张程度划分标准。 结果: 制造业工人、医务人员COSS总分分别为(45.48±8.16)、(45.71±8.46)分,P50对应的总分均为46,T分常模范围分别为(15~92)、(16~91)分。当制造业工人COSS总分<50、50~53、54~57、>57分时,医务人员COSS总分<50、50~54、55~58、>58分时,分别判定为无职业紧张和轻度、中度、重度职业紧张水平。 结论: 本常模符合我国国情及心理学测量要求,操作简便、易行,为制造业工人和医务人员心理健康促进提供理论支持与实践指导。.

来源:Zhonghua Yu Fang Yi Xue Za Zhi,查看原文。版权归原作者所有。

引用

  1. Wang J, Liu XM, Sun YY, et al. [A preliminary study on establishment of the Core Occupational Stress Scale (COSS) norms for manufacturing and medical workers in China]. Zhonghua Yu Fang Yi Xue Za Zhi. 2020. PMID: 33147915. doi:10.3760/cma.j.cn112150-20200430-00674

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。