3D打印加速β-磷酸三钙骨替代材料降解
结果显示支架体积显著减少,颅骨与牙槽骨降解率分别为54.6%/年和90.5%/年,再生骨体积与力学性能接近天然骨。
要点
- 3D打印β-TCP支架涂层双嘧达莫可加速降解并促进血管化骨生成。
- 颅骨与牙槽骨支架降解率分别为54.6%/年和90.5%/年。
- 再生骨体积与力学性能与天然骨相似。
核心结论
- 3D打印结合成骨剂可改善β-TCP降解性能并以血管化有序骨替代吸收的支架。
主要发现
- 组织学证实生成血管化且有序的骨。
- 2至18个月支架体积在颅骨缺损中由23.6%±2.5%降至5.1%±2.2%(P<0.001),牙槽骨缺损中由21.5%±2.2%降至0.2%±1.9%(P<0.001)。
- 颅骨与牙槽骨支架降解率分别为54.6%/年和90.5%/年。
- 支架诱导骨生成体积与天然骨相似:颅骨55.7%±6.9% vs 46.7%±6.8%(P=0.064),牙槽骨31.4%±7.1% vs 33.8%±3.7%(P=0.337)。
- 再生骨与天然骨力学性能相似。
临床怎么用
- 该3D打印与组织工程方案有望作为安全有效的颅颌面骨重建方法。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: β-Tricalcium phosphate (β-TCP) is one of the most common synthetic bone grafting materials utilized in craniofacial reconstruction; however, it is limited by a slow degradation rate. The aim of this study was to leverage 3-dimensional (3D) printing in an effort to accelerate the degradation kinetics of β-TCP. METHODS: Twenty-two 1-month-old New Zealand white rabbits underwent creation of calvarial and alveolar defects, repaired with 3D-printed β-TCP scaffolds coated with 1000 μM of osteogenic agent dipyridamole. Rabbits were euthanized after 2, 6, and 18 months after surgical intervention. Bone regeneration, scaffold degradation, and bone mechanical properties were quantified. RESULTS: Histological analysis confirmed the generation of vascularized and organized bone. Microcomputed tomography analysis from 2 to 18 months demonstrated decreased scaffold volume within calvarial (23.6% ± 2.5%, 5.1% ± 2.2%; P < 0.001) and alveolar (21.5% ± 2.2%, 0.2% ± 1.9%; P < 0.001) defects, with degradation rates of 54.6%/year and 90.5%/year, respectively. Scaffold-inducted bone generation within the defect was volumetrically similar to native bone in the calvarium (55.7% ± 6.9% vs 46.7% ± 6.8%; P = 0.064) and alveolus (31.4% ± 7.1% vs 33.8% ± 3.7%; P = 0.337). Mechanical properties between regenerated and native bone were similar. CONCLUSIONS: Our study demonstrates an improved degradation profile and replacement of absorbed β-TCP with vascularized, organized bone through 3D printing and addition of an osteogenic agent. This novel additive manufacturing and tissue engineering protocol has implications to the future of craniofacial skeletal reconstruction as a safe and efficacious bone tissue engineering method.
引用
- Shen C, Wang MM, Witek L, et al. Transforming the Degradation Rate of β-tricalcium Phosphate Bone Replacement Using 3-Dimensional Printing. Ann Plast Surg. 2021. PMID: 34611100. doi:10.1097/SAP.0000000000002965
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。