通过鼻背中线与鼻尖侧向偏斜建模并测量平均鼻不对称性
研究开发了一种基于面部三维扫描的算法,通过配准正交轴去除倾斜,在鼻背和鼻尖区域探测局部最大投影后1mm和2mm中点来测量鼻中线侧向位置。算法在已知偏斜的模拟不对称鼻模型上验证,平均差异为0.02-0.06mm,并在100名多族裔受试者中测量了最大侧向偏斜、全鼻偏斜和鼻尖偏斜的平均值。该工具可用于鼻整形和鼻再造中改善对称性。
要点
- 基于3D扫描的算法可测量鼻背中线与鼻尖的侧向偏斜。
- 算法在模拟鼻模型上验证,平均差异为0.02-0.06mm。
- 在100名多族裔受试者中提供了鼻偏斜的平均参考值。
核心结论
- 研究提出一种新的鼻评估工具,可用于鼻整形和鼻再造中改善对称性。
研究设计与样本
- 开发并验证一种基于面部三维扫描的鼻偏斜测量算法,在模拟不对称鼻模型上验证,并在Binghamton University 3D Facial Expression数据库的100名多族裔受试者中测量。
主要发现
- 模拟偏斜在临床可忽略的平均差异(0.02-0.06mm)下被算法评估,并适用于小侧向偏斜(1-5mm)。
- 测量了100名受试者的最大侧向偏斜、全鼻偏斜和鼻尖偏斜的平均值,为手术规划提供参考。
关键数值与推荐
- 算法通过将3D面部扫描配准到正交轴以去除倾斜,在鼻背和鼻尖区域沿横向平面探测局部最大投影后1mm和2mm的中点来定位鼻中线侧向位置。
- 模拟偏斜通过指数扭转应用于对称平均鼻,控制最大偏斜和曲率程度。
临床怎么用
- 该工具可在术前和术中辅助评估鼻不对称,帮助医生在鼻整形和鼻再造中调整小于2-3mm的美容重要距离。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
In rhinoplasty and nasal reconstruction, achieving symmetry is critical for optimal patient outcomes and reducing re-operation rates. Assessing nasal asymmetry is challenging, both pre- and intra-operatively, if based on only a surgeons' visual perception to assess and adjust the small distances important to cosmesis (<2-3 mm). To measure nasal symmetry, we first developed an algorithm to analyze lateral nasal deviation on facial three-dimensional (3D) scans captured by external surface scanning. In this, nasal deviation is measured by first registering a 3D facial scan to orthogonal axes in order to remove tilt. The lateral position of the nasal midline is then found across transverse planes along the dorsum and nasal tip regions by probing midpoints 1 and 2 mm back from the local maximum projection. The nasal deviation measurement algorithm was validated on a simulated asymmetrical nose model with known nasal deviation. Simulated deviations were applied to the symmetrical average nose using an exponential twist away from the face, with control of the maximum deviation and degree of curvature. Modeled deviations were evaluated with the algorithm at clinically negligible (0.02-0.06 mm) average differences and for small lateral deviations (1-5 mm). Nasal deviation using the algorithms was then measured for the 100 multi-ethnic subjects in the Binghamton University 3D Facial Expression database. Average values for maximum lateral deviation, deviation across the whole nose, and deviation at the nose tip were measured to provide context to deviation measurements in surgical planning. This research presents a new nasal assessment tool that can be useful in improving symmetry in rhinoplasty and reconstruction.
引用
- Fishman Z, Whyne CM, Hope A, et al. Modeling and measuring average nasal asymmetry by dorsum midline and nose tip lateral deviation. J Plast Reconstr Aesthet Surg. 2020. PMID: 33199224. doi:10.1016/j.bjps.2020.10.017
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。