文献速递美容整形

分步模拟:3D打印低成本鼻整形模拟器的应用

Step-Specific Simulation: The Utility of 3D Printing for the Fabrication of a Low-Cost, Learning Needs-Based Rhinoplasty Simulator.
PubMed 文献 · Aesthet Surg J · 2020-01-01

本研究基于CT扫描数据,采用3D打印技术制作了包含骨骼、软骨和皮肤的模块化鼻整形模拟器,可针对5个既往认定的学习薄弱环节进行刻意练习,单次最大重复成本为75加元。该模拟器旨在辅助住院医师培训,适应以能力为导向的教育改革。

要点

  • 3D打印模拟器覆盖5个鼻整形学习薄弱环节,支持分步刻意练习。
  • 模拟器模块化设计,三个组件可互换,最大重复成本75加元。
  • 该低成本模拟器有望融入能力导向的整形外科课程体系。

核心结论

  • 利用3D打印技术成功开发了低成本、针对特定操作的鼻整形模拟器,可强化刻意练习。

研究设计与样本

  • 基于患者CT扫描数据分割面部骨骼、上下外侧软骨及鼻中隔,并采用多种材料3D打印制作模块化模拟器。

主要发现

  • 模拟器包含三个可互换组件,完美契合设计,可针对5个鼻整形学习薄弱区域进行刻意练习。
  • 模拟器最大重复成本为75加元。

临床怎么用

  • 可用于住院医师鼻整形分步技能培训,在确保患者安全的同时提供动手经验。
  • 低成本特性便于在资源有限的教学环境中推广模拟训练。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Rhinoplasty is a complex procedure that requires meticulous planning and precise execution. Plastic surgeons involved in teaching residents must balance a trainee's hands-on experience while ensuring appropriate execution of difficult maneuvers. Surgical simulation, a field of growing importance with the shift towards competency-based education, may aid in trainee skill development. Through the concept of deliberate practice, the authors looked to explore the utility and economics of 3-dimensional (3D) printing technology to develop a step-specific rhinoplasty simulator. OBJECTIVES: The main objective of this study was to address rhinoplasty skills previously identified as "learning areas of weakness" and develop a low-cost, step-specific simulator to help rhinoplasty teaching. METHODS: A patient's facial bones, upper and lower lateral cartilages, and septum were segmented from a computed tomography scan and rendered in 3D format. This was 3D printed utilizing Ultimaker Polylactic filament with a polyvinyl acetate dissolvable support for bone, a mixture of Rigur 450 and Tango plus polyjet material for cartilage, and Smooth-On Dragon Skin for skin. RESULTS: A modular simulator was developed with 3 separate, interchangeable components with a perfect fit design. The simulator allowed for deliberate practice of the 5 rhinoplasty learning areas of weakness, with a maximal recurring cost of $75 CAD. CONCLUSIONS: Through the employment of 3D printing, a low-cost, maneuver-specific rhinoplasty simulator reinforcing deliberate practice was developed. This concept of simulation-based deliberate practice may be of increasing interest when considering the implementation of competency-based curricular standards in plastic surgery education.

来源:Aesthet Surg J,查看原文。版权归原作者所有。

引用

  1. Zammit D, Safran T, Ponnudurai N, et al. Step-Specific Simulation: The Utility of 3D Printing for the Fabrication of a Low-Cost, Learning Needs-Based Rhinoplasty Simulator. Aesthet Surg J. 2020. PMID: 32064498. doi:10.1093/asj/sjaa048

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。