文献速递颅颌面外科创面修复

双嘧达莫涂层3D打印生物陶瓷支架在生长期颅骨骨组织工程中的应用:构建优化及对颅缝通畅性的影响

Bone Tissue Engineering in the Growing Calvaria Using Dipyridamole-Coated, Three-Dimensionally-Printed Bioceramic Scaffolds: Construct Optimization and Effects on Cranial Suture Patency.
PubMed 文献 · Plast Reconstr Surg · 2020-01-01

该研究在5周龄新西兰白兔双侧颅骨缺损模型中植入3D打印β-磷酸三钙生物陶瓷支架,比较不同孔径和双嘧达莫浓度对骨再生的影响。结果显示支架组骨生长显著优于空白缺损,500 μm孔径+1000 μM双嘧达莫组合骨生长最多且支架残留最少,所有浓度下颅缝保持通畅且无异位骨形成。

要点

  • 3D打印生物陶瓷支架可促进生长期颅骨缺损骨再生
  • 500 μm孔径联合1000 μM双嘧达莫获最佳骨生长与最低支架残留
  • 所有双嘧达莫浓度均未影响颅缝通畅性且无异位骨形成

核心结论

  • 3D打印生物陶瓷/双嘧达莫支架可有效增强生长期颅骨骨生成并保持颅缝通畅。

研究设计与样本

  • 在5周龄(约1.1 kg)新西兰白兔双侧颅骨制备10 mm缺损,分析16只。
  • 支架为象限结构,孔径220、330、500 μm,胶原涂层后浸泡双嘧达莫100、1000、10000 μM,对照组为空白缺损,术后8周取材。

主要发现

  • 支架诱导的骨生长显著大于空白缺损(p = 0.02)。
  • 500 μm孔径+1000 μM双嘧达莫组合骨生长最多且缺损内支架残留最少。
  • 组织学见血管化编织骨和板层骨及支架内初始血管管形成。
  • micro-CT和组织学显示所有双嘧达莫浓度下颅缝通畅,无跨颅缝异位骨形成。

临床怎么用

  • 生长期颅骨缺损修复可考虑500 μm孔径+1000 μM双嘧达莫的3D打印生物陶瓷支架设计。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Three-dimensionally-printed bioceramic scaffolds composed of β-tricalcium phosphate delivering the osteogenic agent dipyridamole can heal critically sized calvarial defects in skeletally mature translational models. However, this construct has yet to be applied to growing craniofacial models. In this study, the authors implanted three-dimensionally-printed bioceramic/dipyridamole scaffolds in a growing calvaria animal model and evaluated bone growth as a function of geometric scaffold design and dipyridamole concentration. Potential adverse effects on the growing suture were also evaluated. METHODS: Bilateral calvarial defects (10 mm) were created in 5-week-old (approximately 1.1 kg) New Zealand White rabbits (n = 16 analyzed). Three-dimensionally-printed bioceramic scaffolds were constructed in quadrant form composed of varying pore dimensions (220, 330, and 500 μm). Each scaffold was coated with collagen and soaked in varying concentrations of dipyridamole (100, 1000, and 10,000 μM). Controls consisted of empty defects. Animals were killed 8 weeks postoperatively. Calvariae were analyzed using micro-computed tomography, three-dimensional reconstruction, and nondecalcified histologic sectioning. RESULTS: Scaffold-induced bone growth was statistically greater than bone growth in empty defects (p = 0.02). Large scaffold pores, 500 μm, coated in 1000 μM dipyridamole yielded the most bone growth and lowest degree of scaffold presence within the defect. Histology showed vascularized woven and lamellar bone along with initial formation of vascular canals within the scaffold lattice. Micro-computed tomographic and histologic analysis revealed patent calvarial sutures without evidence of ectopic bone formation across all dipyridamole concentrations. CONCLUSION: The authors present an effective pediatric bone tissue-engineering scaffold design and dipyridamole concentration that is effective in augmentation of calvarial bone generation while preserving cranial suture patency.

来源:Plast Reconstr Surg,查看原文。版权归原作者所有。

引用

  1. Maliha SG, Lopez CD, Coelho PG, et al. Bone Tissue Engineering in the Growing Calvaria Using Dipyridamole-Coated, Three-Dimensionally-Printed Bioceramic Scaffolds: Construct Optimization and Effects on Cranial Suture Patency. Plast Reconstr Surg. 2020. PMID: 31985634. doi:10.1097/PRS.0000000000006483

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。