个性化三维烧伤评估的预测建模
本文针对大面积烧伤患者提出一种基于个性化三维模型的方法,利用少量人体测量数据准确评估烧伤面积占体表面积的百分比。研究先验证测量流程的可靠性与可行性,再通过分层随机样本和机器学习筛选预测体表面积的关键测量指标。结果显示身高及胸围、颈围、臀围和腰围是体表面积的最佳预测因子,仅用三至四项测量构建的三维模型即具有良好准确度并与金标准三维扫描几何接近。
要点
- 身高及胸围、颈围、臀围和腰围是预测体表面积的最佳人体测量指标。
- 仅需三至四项人体测量即可构建准确且几何接近金标准的三维模型。
- 该方法旨在减少烧伤面积评估误差,从而降低并发症并改善个体化治疗。
核心结论
- 基于少量人体测量数据的个性化三维模型可准确评估烧伤面积占体表面积的百分比。
研究设计与样本
- 本研究为方法学开发与验证研究,先进行人体测量流程的可靠性与可行性研究以确定临床相关测量指标。
- 随后生成大型代表性分层随机样本,用于输出预测建模所需的人体测量特征。
- 采用机器学习算法评估人体测量指标的重要性及其子集对体表面积预测的作用。
- 使用误差指标和最大距离三维彩色图评估基于有限测量构建的三维模型的形态与体表面积准确度。
主要发现
- 身高以及胸围、颈围、臀围和腰围被确定为体表面积的最佳预测因子。
- 基于三至四项人体测量构建的三维模型显示出良好准确度,且几何上接近金标准三维扫描。
临床怎么用
- 临床可利用身高及胸围、颈围、臀围和腰围等少量测量数据构建个性化三维模型,辅助烧伤面积评估。
- 该方法有望减少烧伤面积评估误差,从而降低医疗和手术并发症并改善患者结局。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
For patients with major burn injuries, an accurate burn size estimation is essential to plan appropriate treatment and minimize medical and surgical complications. However, current clinical methods for burn size estimation lack accuracy and reliability. To overcome these limitations, this paper proposes a 3D-based approach-with personalized 3D models from a limited set of anthropometric measurements-to accurately assess the percent TBSA affected by burns. First, a reliability and feasibility study of the anthropometric measuring process was performed to identify clinically relevant measurements. Second, a large representative stratified random sample was generated to output several anthropometric features required for predictive modeling. Machine-learning algorithms assessed the importance and the subsets of anthropometric measurements for predicting the BSA according to specific patient morphological features. Then, the accuracy of both the morphology and BSA of 3D models built from a limited set of measurements was evaluated using error metrics and maximum distances 3D color maps. Results highlighted the height and circumferences of the bust, neck, hips, and waist as the best predictors for BSA. 3D models built from three to four anthropometric measurements showed good accuracy and were geometrically close to gold standard 3D scans. Outcomes of this study aim to decrease medical and surgical complications by decreasing errors in percent TBSA assessments and, therefore, improving patient outcomes by personalizing care.
引用
- Desbois A, Beguet F, Leclerc Y, et al. Predictive Modeling for Personalized Three-Dimensional Burn Injury Assessments. J Burn Care Res. 2020. PMID: 31586416. doi:10.1093/jbcr/irz114
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。