文献速递美容整形

可灭菌、按比例、患者特异性3D打印鼻整形模型的院内制作

In-House Manufacture of Sterilizable, Scaled, Patient-Specific 3D-Printed Models for Rhinoplasty.
PubMed 文献 · Aesthet Surg J · 2019-01-01

该研究利用科室现有资源和开源3D成像平台,开发了一套低成本、可重复的院内虚拟手术规划与3D打印鼻整形模型制作流程。共为12例鼻整形患者成功制作并使用模型,平均准备一套术前和术后模型需3小时,每模型打印需18至24小时,每套模型材料成本约5美元。

要点

  • 利用免费3D成像软件和科室3D打印机可院内制作鼻整形模型
  • 每套模型材料成本约5美元,准备时间平均3小时
  • 模型可灭菌、按比例且患者特异性,用于术前规划和沟通

核心结论

  • 描述了一种低成本制作可灭菌、按比例、患者特异性3D打印鼻整形模型的方法,可能随3D打印机硬件成本下降而受学术和美容中心关注。

研究设计与样本

  • 技术报告类研究,利用科室可用资源和开源3D成像平台开发院内虚拟手术规划与3D打印模型制作流程。
  • 术前3D照片经免费3D成像与雕刻软件Blender(版本2.78)进行虚拟鼻整形,达到理想术后效果后制作术前和理想术后3D模型。
  • 模型在院内使用科室拥有的3D打印机制作,共用于12例鼻整形患者。

主要发现

  • 成功制作并使用了3D打印模型于12例鼻整形患者。
  • 平均准备一套术前和术后模型需3小时。
  • 每个模型打印过程需18至24小时。
  • 每套手术模型总材料成本约5.00美元。

临床怎么用

  • 可用于鼻整形术前规划、患者沟通和手术技术辅助。
  • 适合具备3D打印机和开源3D成像平台的科室开展院内制作。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Rhinoplasty relies on clear patient communication and precise execution of a three-dimensional (3D) plan to achieve optimal results. As 3D imaging and printing continue to grow in popularity within the medical field, rhinoplasty surgeons have begun to leverage these resources as an aid to preoperative planning, patient communication, and the technical performance of this challenging operation. OBJECTIVES: Utilizing departmentally available resources and open-access 3D imaging platforms, we have developed an affordable, reproducible protocol for rapid in-house virtual surgical planning (VSP) and subsequent manufacture of 3D-printed rhinoplasty models. METHODS: Preoperative 3D photographic images underwent virtual rhinoplasty using a freely available 3D imaging and sculpting program (BlenderTM [Version 2.78, Amsterdam, The Netherlands]). Once the ideal postoperative result was digitally achieved, scaled, sterilizable, and patient-specific 3D models of the preoperative and ideal postoperative result were manufactured in-house using a departmentally owned 3D printer. RESULTS: 3D-printed models have successfully been manufactured and employed for 12 patients undergoing rhinoplasty. The average time to prepare a set of pre- and postoperative models was 3 hours, while the printing process required 18 to 24 hours per model. Each set of surgical models can be manufactured at a total materials cost of approximately $5.00. CONCLUSIONS: We describe an affordable means to construct sterilizable, scaled, patient-specific 3D-printed models for rhinoplasty. This technique may become of increasing interest to academic and cosmetic centers as hardware costs of 3D printers continue to fall.

来源:Aesthet Surg J,查看原文。版权归原作者所有。

引用

  1. Bekisz JM, Liss HA, Maliha SG, et al. In-House Manufacture of Sterilizable, Scaled, Patient-Specific 3D-Printed Models for Rhinoplasty. Aesthet Surg J. 2019. PMID: 29982464. doi:10.1093/asj/sjy158

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。