文献速递颅颌面外科

使用高保真腭裂模拟器评估腭裂手术技术表现并确定学习曲线

Assessing Technical Performance and Determining the Learning Curve in Cleft Palate Surgery Using a High-Fidelity Cleft Palate Simulator.
PubMed 文献 · Plast Reconstr Surg · 2018-01-01

本研究利用新开发的评估工具和高保真腭裂模拟器,通过纵向模拟训练评估腭裂修复的技术表现。3名住院医师各完成5次、1名完成9次连续内镜下模拟腭裂修复,另由2名小儿整形外科研究员和2名腭裂专家完成模拟修复,采用CLOSATS和终产物量表评估。结果显示住院医师各项评分随训练呈对数增长,CLOSATS和整体评分信度高,终产物信度较低,达到最低标准需6.3次模拟训练。

要点

  • 高保真腭裂模拟器可提升腭裂修复的技术表现。
  • CLOSATS和整体评分信度高,终产物评估信度较低。
  • 达到最低标准需6.3次模拟训练。

核心结论

  • 高保真腭裂模拟器已开发,可改善腭裂修复的技术表现。
  • 模拟器和技能评估分数可用于在患者手术前确定表现。

研究设计与样本

  • 3名住院医师各完成5次、1名住院医师完成9次连续内镜下记录的模拟腭裂修复。
  • 2名小儿整形外科研究员和2名腭裂专家也完成了记录的模拟修复。
  • 开发了腭裂客观结构化技术技能评估(CLOSATS)和终产物量表以评估表现。
  • 2名盲法腭裂外科医生使用CLOSATS、终产物量表和先前开发的整体评定量表评估记录和最终修复。

主要发现

  • 住院医师每次连续模拟训练后,手术特异性(CLOSATS)、整体评分和终产物平均分呈对数增长。
  • CLOSATS的平均条目组内相关系数(ICC)为0.85 ± 0.093,整体评分的平均条目ICC为0.91 ± 0.02,评分者间信度高。
  • 终产物评估的信度较低,平均条目ICC为0.66 ± 0.15。
  • 使用总体截止分数10分中的7分进行标准设定线性回归,对应CLOSATS和整体评分的通过分数分别为44分(满分60)和23分(满分30)。
  • 使用对数最佳拟合曲线,达到最低标准需要6.3次模拟训练。

关键数值与推荐

  • CLOSATS通过分数为44分(满分60),整体评分通过分数为23分(满分30),基于总体截止分数10分中的7分。
  • 达到最低标准需要6.3次模拟训练。

临床怎么用

  • 模拟器和技能评估分数可用于在患者手术前确定表现。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: This study assessed technical performance in cleft palate repair using a newly developed assessment tool and high-fidelity cleft palate simulator through a longitudinal simulation training exercise. METHODS: Three residents performed five and one resident performed nine consecutive endoscopically recorded cleft palate repairs using a cleft palate simulator. Two fellows in pediatric plastic surgery and two expert cleft surgeons also performed recorded simulated repairs. The Cleft Palate Objective Structured Assessment of Technical Skill (CLOSATS) and end-product scales were developed to assess performance. Two blinded cleft surgeons assessed the recordings and the final repairs using the CLOSATS, end-product scale, and a previously developed global rating scale. RESULTS: The average procedure-specific (CLOSATS), global rating, and end-product scores increased logarithmically after each successive simulation session for the residents. Reliability of the CLOSATS (average item intraclass correlation coefficient (ICC), 0.85 ± 0.093) and global ratings (average item ICC, 0.91 ± 0.02) among the raters was high. Reliability of the end-product assessments was lower (average item ICC, 0.66 ± 0.15). Standard setting linear regression using an overall cutoff score of 7 of 10 corresponded to a pass score for the CLOSATS and the global score of 44 (maximum, 60) and 23 (maximum, 30), respectively. Using logarithmic best-fit curves, 6.3 simulation sessions are required to reach the minimum standard. CONCLUSIONS: A high-fidelity cleft palate simulator has been developed that improves technical performance in cleft palate repair. The simulator and technical assessment scores can be used to determine performance before operating on patients.

来源:Plast Reconstr Surg,查看原文。版权归原作者所有。

引用

  1. Podolsky DJ, Fisher DM, Wong Riff KW, et al. Assessing Technical Performance and Determining the Learning Curve in Cleft Palate Surgery Using a High-Fidelity Cleft Palate Simulator. Plast Reconstr Surg. 2018. PMID: 29579024. doi:10.1097/PRS.0000000000004426

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。