文献速递颅颌面外科

术前牙槽突段位置作为单侧唇腭裂患者龈骨膜成形术成功的预测指标

Preoperative Alveolar Segment Position as a Predictor of Successful Gingivoperiosteoplasty in Patients with Unilateral Cleft Lip and Palate.
PubMed 文献 · Plast Reconstr Surg · 2018-01-01

单机构回顾性研究纳入50例接受鼻牙槽塑形的单侧唇腭裂患者,其中40例行龈骨膜成形术、10例未行。鼻牙槽塑形后大段垂直旋转和牙槽突段正确解剖区对齐百分比是决定行龈骨膜成形术的显著预测因素(预测力86%)。鼻牙槽塑形后裂隙宽度、大/小段重叠、牙槽突段对齐、大段水平旋转和牙槽突段宽度是龈骨膜成形术成功的显著预测因素(预测力86.5%)。

要点

  • 鼻牙槽塑形后大段垂直旋转和正确解剖区对齐百分比可预测是否行龈骨膜成形术(预测力86%)。
  • 鼻牙槽塑形后裂隙宽度、段间重叠、对齐、大段水平旋转和段宽度可预测手术成功(预测力86.5%)。
  • 龈骨膜成形术可使最多60%唇腭裂患者避免二期牙槽骨移植。

核心结论

  • 大段垂直旋转和牙槽突段正确解剖对齐是决定行龈骨膜成形术的阳性预测因素。
  • 鼻牙槽塑形后牙槽突段正确对齐和直接接触是龈骨膜成形术成功的显著预测因素。

研究设计与样本

  • 单机构回顾性研究,纳入50例接受鼻牙槽塑形的单侧唇腭裂患者,其中40例行龈骨膜成形术、10例未行。
  • 牙槽突段形态直接从鼻牙槽塑形前后的上颌牙模型上测量。

主要发现

  • 鼻牙槽塑形后大段垂直旋转和牙槽突段正确解剖区对齐百分比是决定行龈骨膜成形术的显著预测因素(预测力86%)。
  • 鼻牙槽塑形后裂隙宽度、大/小段重叠、牙槽突段对齐、大段水平旋转和牙槽突段宽度是龈骨膜成形术成功的显著预测因素(预测力86.5%)。

关键数值与推荐

  • 龈骨膜成形术成功定义为最终无需牙槽骨移植。
  • 共测试18项牙槽形态和位置特征,包括裂隙宽度、牙槽突段水平和垂直位置、牙槽台阶及牙槽突段对合程度。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Gingivoperiosteoplasty can avoid secondary alveolar bone grafting in up to 60 percent of patients with a cleft. However, preoperative predictors of success have not been characterized. This study reports on the preoperative alveolar segment position most favorable for successful gingivoperiosteoplasty. METHODS: The authors performed a single-institution, retrospective review of patients with a unilateral cleft who underwent nasoalveolar molding. Alveolar segment morphology was directly measured from maxillary dental models created before and after nasoalveolar molding. Statistical analysis was performed to identify parameters associated with the decision to perform gingivoperiosteoplasty and its success, defined as the absence of an eventual need for alveolar bone grafting. RESULTS: Fifty patients with a unilateral cleft who received nasoalveolar molding therapy were included in this study (40 underwent gingivoperiosteoplasty and 10 did not). Eighteen alveolar morphology and position characteristics were tested, including cleft gap width, horizontal and vertical positions of the alveolar segments, alveolar stepoff, and degree of alveolar segment apposition. Post-nasoalveolar molding vertical rotation of the greater segment and the percentage of segment alignment in the correct anatomical zone were statistically significant predictors of the decision to perform gingivoperiosteoplasty (86 percent predictive power). Cleft gap, greater/lesser segment overlap, alveolar segment alignment, greater segment horizontal rotation, and alveolar segment width following nasoalveolar molding were significant predictors of gingivoperiosteoplasty success (86.5 percent predictive power). CONCLUSIONS: Greater segment vertical rotation and proper alveolar segment anatomical alignment are positive predictors of the decision to perform gingivoperiosteoplasty. Post-nasoalveolar molding evidence of proper alignment and direct contact between the alveolar segments were significant predictors of successful gingivoperiosteoplasty. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, III.

来源:Plast Reconstr Surg,查看原文。版权归原作者所有。

引用

  1. Esenlik E, Bekisz JM, Gibson T, et al. Preoperative Alveolar Segment Position as a Predictor of Successful Gingivoperiosteoplasty in Patients with Unilateral Cleft Lip and Palate. Plast Reconstr Surg. 2018. PMID: 29256997. doi:10.1097/PRS.0000000000004231

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。