文献速递颅颌面外科显微修复重建

三维打印技术新分类:颅颌面个体化手术系统综述

A New Classification of Three-Dimensional Printing Technologies: Systematic Review of Three-Dimensional Printing for Patient-Specific Craniomaxillofacial Surgery.
PubMed 文献 · Plast Reconstr Surg · 2017-01-01

该文系统检索PubMed至2015年5月4日,纳入33篇颅颌面个体化三维打印应用文章共315例患者。作者将打印技术分为轮廓模型(I型)、导板(II型)、夹板(III型)和植入物(IV型),并发现颅面与颌面手术中四类方法的使用分布显著不同(p<0.0001);4项对比研究中2项显示三维打印改善结局。

要点

  • 颅颌面三维打印个体化应用可归为轮廓模型、导板、夹板和植入物四类。
  • 颅面手术以轮廓模型为主(84%),颌面手术导板与夹板占比更高。
  • 打印对象平均制作时间18.9小时,平均成本1353.31美元。

核心结论

  • 颅颌面手术三维打印技术可分为轮廓模型(I型)、导板(II型)、夹板(III型)和植入物(IV型)四类。
  • 四类方法在颅面与颌面手术中的使用分布显著不同(p<0.0001),反映两者手术目标不同。

研究设计与样本

  • 系统综述:2015年5月4日检索PubMed三维打印与手术相关文献,获313篇唯一文章,经纳入排除后分析141篇全文,其中33篇颅颌面文章纳入分析。
  • 33篇文章共纳入315例接受三维打印辅助手术的患者,分为203例颅面患者(205个打印对象)和112例颌面患者(137个打印对象)。

主要发现

  • 最常用建模软件为Mimics,最常用打印软件为3D Systems。
  • 打印对象平均制作时间18.9小时(范围1.5至96小时),平均成本1353.31美元(范围69.75至5500美元)。
  • 颅面患者中轮廓模型173个(84%)、导板13个(6%)、夹板2个(1%)、植入物17个(8%)。
  • 颌面患者中轮廓模型41个(30%)、导板48个(35%)、夹板40个(29%)、植入物8个(6%)。
  • 4项研究比较三维打印与传统技术,其中2项发现三维打印改善结局。

关键数值与推荐

  • 三维打印分类:I型轮廓模型、II型导板、III型夹板、IV型植入物。
  • 颅面与颌面患者四类打印对象分布差异有统计学意义(p<0.0001)。

临床怎么用

  • 临床可按四类分型选择三维打印个体化方案:轮廓模型用于术前规划与塑形参考,导板与夹板辅助定位和固定,植入物用于结构重建。
  • 颅面手术优先考虑轮廓模型,颌面手术可更多考虑导板和夹板。
  • 制作时间与成本数据可用于术前资源规划与患者沟通。

局限性

  • 检索截至2015年5月4日,仅纳入PubMed数据库。
  • 仅4项研究比较三维打印与传统技术,其中2项显示改善结局。
  • 纳入研究数量有限(33篇颅颌面文章,315例患者),证据级别受限。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Three-dimensional printing technology has been advancing in surgical applications. This systematic review examines its patient-specific applications in craniomaxillofacial surgery. METHODS: Terms related to "three-dimensional printing" and "surgery" were searched on PubMed on May 4, 2015; 313 unique articles were returned. Inclusion and exclusion criteria concentrated on patient-specific surgical applications, yielding 141 full-text articles, of which 33 craniomaxillofacial articles were analyzed. RESULTS: Thirty-three articles included 315 patients who underwent three-dimensional printing-assisted operations. The most common modeling software was Mimics, the most common printing software was 3D Systems, the average time to create a printed object was 18.9 hours (range, 1.5 to 96 hours), and the average cost of a printed object was $1353.31 (range, $69.75 to $5500). Surgical procedures were divided among 203 craniofacial patients (205 three-dimensional printing objects) and 112 maxillofacial patients (137 objects). Printing technologies could be classified as contour models, guides, splints, and implants. For craniofacial patients, 173 contour models (84 percent), 13 guides (6 percent), two splints (1 percent), and 17 implants (8 percent) were made. For maxillofacial patients, 41 contour models (30 percent), 48 guides (35 percent), 40 splints (29 percent), and eight implants (6 percent) were made. These distributions were significantly different (p < 0.0001). Four studies compared three-dimensional printing techniques to conventional techniques; two of them found that three-dimensional printing produced improved outcomes. CONCLUSIONS: Three-dimensional printing technology in craniomaxillofacial surgery can be classified into contour models (type I), guides (type II), splints (type III), and implants (type IV). These four methods vary in their use between craniofacial and maxillofacial surgery, reflecting their different goals. This understanding may help advance and predict three-dimensional printing applications for other types of plastic surgery and beyond.

来源:Plast Reconstr Surg,查看原文。版权归原作者所有。

引用

  1. Jacobs CA, Lin AY. A New Classification of Three-Dimensional Printing Technologies: Systematic Review of Three-Dimensional Printing for Patient-Specific Craniomaxillofacial Surgery. Plast Reconstr Surg. 2017. PMID: 28445375. doi:10.1097/PRS.0000000000003232

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。