3D打印透明面罩治疗烧伤儿童面部增生性瘢痕
本研究采用纵向病例随访设计,纳入两名面部烧伤后增生性瘢痕患儿,通过便携式3D扫描与计算机辅助设计(CAD)制作3D打印透明面罩,并附加医用硅酮凝胶。患儿每日佩戴至少20小时,治疗前、治疗后1个月和3个月评估瘢痕,结果显示平均瘢痕厚度下降、面部外观满意,面罩适配良好且耐受性好、无并发症。
要点
- 3D打印透明面罩制作便捷高效,适用于烧伤后儿童面部增生性瘢痕。
- 两名患儿佩戴面罩每日至少20小时,1个月和3个月评估瘢痕厚度下降。
- 面罩适配良好,治疗耐受性好,未报告并发症。
核心结论
- 3D打印透明面罩制作方便高效,适合治疗烧伤后儿童面部增生性瘢痕。
研究设计与样本
- 纵向病例随访研究,纳入两名面部烧伤后增生性瘢痕患儿。
主要发现
- 治疗后1个月和3个月评估显示平均瘢痕厚度下降,面部外观满意。
- 3D打印面罩在两名患儿均适配良好,治疗耐受性好,未报告并发症。
关键数值与推荐
- 患儿及家属被指导每日佩戴面罩至少20小时。
- 在治疗前、治疗后1个月和3个月评估面部瘢痕情况。
临床怎么用
- 可采用便携式3D扫描与CAD制作个性化透明面罩,并附加医用硅酮凝胶提供额外压力。
- 面罩通过弹性带连接打印的锚定螺栓固定于患者。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
INTRODUCTION: Facial burns could create serious scar problems resulting disfigurement particularly on children. The conventional methods of producing transparent face masks for scar control remains complex and require dexterous skills of experienced clinician and patients' compliance during fitting. In this study, we adopted a portable 3D scanning and Computer-Aided Design (CAD) to produce 3D-printed transparent facemasks. Its efficacy was tested on two children with facial burns resulting hypertrophic scars. METHOD: This study adopted a longitudinal case follow up research design. Two children with facial burns were recruited in the study upon consent. Their facial features were scanned with a portable 3D scanner and then edited and converted to the target files: the customized printable facemask files. The transparent facemask was directly printed out on the transparent biocompatible material followed by adding the medical grade silicone gel to provide extra pressure on the scar site. The facemasks were fitted to the patients with elastic straps connecting the printed anchoring bolts. Both children and family were instructed to wear the facemask for at least 20h per day and they were assessed before treatment, one month and three months after treatment on the facial scar conditions. RESULTS: At the one-month and three-month assessments after treatment, a decrease in average scar thickness was shown and the facial appearance was satisfactory. The 3D-printed facemasks were well fitted on both patients. The treatment was well-tolerated and no complication was reported. CONCLUSION: 3D-printed transparent facemask is convenient and efficient to fabricate, and is suitable for treating pediatric facial hypertrophic scars after burn.
引用
- Wei Y, Li-Tsang CWP, Liu J, et al. 3D-printed transparent facemasks in the treatment of facial hypertrophic scars of young children with burns. Burns. 2016. PMID: 28040366. doi:10.1016/j.burns.2016.08.034
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。