文献速递烧伤创面修复

低资源环境下患者特异性3D打印烧伤矫形器的即时数字化制造工作流程:一项回顾性研究

Point-of-care digital manufacturing workflow for patient-specific 3D-printed burn orthoses in a low-resource setting: A retrospective study.
PubMed 文献 · Burns · 2026-08-08

该回顾性研究在低收入和中等收入国家医院内评价整合光学三维扫描、计算机辅助设计与院内熔融丝材制造3D打印的工作流程,用于制造患者特异性烧伤矫形器。四例3至16岁患者分别代表急性期、术前、术后及围手术期混合矫形路径,工作流程均顺利完成,无技术放弃、因技术失败重新扫描、转为传统制造或打印失败。所有矫形器均在临床请求后2至3天内完成临床适配和交付。

要点

  • 医院内即时数字化制造患者特异性烧伤矫形器在低资源环境下技术可行。
  • 扫描需20至25分钟,CAD定制需5至8小时,打印机累计运行29至78小时。
  • 矫形器在临床请求后2至3天内完成适配和交付。

核心结论

  • 医院内即时数字化制造患者特异性烧伤矫形器在该低资源临床环境中技术和操作可行。
  • 该工作流程支持烧伤护理多个阶段的矫形器管理,并为资源受限医疗系统提供实用实施框架。

研究设计与样本

  • 回顾性研究,评估整合光学三维扫描、计算机辅助设计和院内熔融丝材制造3D打印的医院内工作流程。
  • 四例年龄3至16岁患者,分别代表急性期、术前、术后和围手术期混合矫形路径。

主要发现

  • 工作流程在全部四例中成功完成,无技术放弃、因技术失败重新扫描、转为传统制造或打印失败。
  • 扫描需20至25分钟,CAD定制需5至8小时,打印机累计运行29至78小时。
  • 所有矫形器均在临床请求后2至3天内完成临床适配和交付。
  • 三例经单次设计迭代完成,第四例因术后解剖和功能需求变化需三次迭代。

临床怎么用

  • 在资源受限医院内可建立整合三维扫描、CAD和FFF 3D打印的即时制造流程,用于烧伤矫形器。
  • 该流程可覆盖急性期、术前、术后及围手术期混合等多种烧伤护理阶段的矫形器需求。

局限性

  • 样本量小,仅四例患者。
  • 需要更大规模前瞻性研究评估临床结局、成本效益和长期可持续性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

INTRODUCTION: Burn injuries cause substantial long-term disability in low- and middle-income countries (LMICs), where access to specialized rehabilitation and patient-specific orthoses is limited. Hospital-based point-of-care (POC) digital manufacturing may enable local production of customized burn orthoses in resource-constrained healthcare settings. METHODS: This retrospective study evaluated a hospital-based workflow integrating optical three-dimensional (3D) scanning, computer-aided design (CAD), and in-house fused filament fabrication (FFF) 3D printing. Four patients aged 3-16 years represented acute-phase, preoperative, postoperative, and hybrid perioperative orthotic pathways. Feasibility outcomes included workflow completion, technical failures, design iterations, fabrication time, clinical fitting, and delivery time. RESULTS: The workflow was completed successfully in all four cases without technical abandonment, repeat scanning due to technical failure, conversion to conventional fabrication, or print failure. Scanning required 20-25 min, CAD customization 5-8 h, and cumulative printer operation 29-78 h. All orthoses were clinically fitted and delivered within 2-3 days of the clinical request. Three cases were completed after a single design iteration, whereas Case 4 required three iterations because of evolving postoperative anatomy and functional requirements. CONCLUSIONS: Hospital-based POC digital manufacturing of patient-specific burn orthoses was technically and operationally feasible in this low-resource clinical setting. The workflow supported orthotic management across multiple stages of burn care and provides a practical implementation framework for resource-constrained healthcare systems. Larger prospective studies are needed to evaluate clinical outcomes, cost-effectiveness, and long-term sustainability.

来源:Burns,查看原文。版权归原作者所有。

引用

  1. Kim GM, Kumssa EA, Sima FD, et al. Point-of-care digital manufacturing workflow for patient-specific 3D-printed burn orthoses in a low-resource setting: A retrospective study. Burns. 2026. PMID: 42607513. doi:10.1016/j.burns.2026.108173

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。