将CTA穿支信息转化为标准化手术规划坐标的软件辅助工作流
该研究回顾性分析52例DIEP皮瓣重建患者的170条穿支,验证自研图像处理工具能否标准化坐标提取并自动生成腹壁穿支二维空间图。软件与放射科评估的质心偏差仅(-0.4, 1.0) mm,均方根误差6.04 mm,每例标准化制图约8±6分钟。
要点
- 自研软件可基于CTA轴向切片自动提取穿支坐标并生成标准化空间图。
- 与人工放射评估高度一致,系统偏差小、误差在临床可接受范围。
- 每例制图约8±6分钟,有助于优化术前影像工作流。
核心结论
- 该工具为DIEP皮瓣规划中标准化和可视化既有放射数据提供了可靠、客观的框架。
- 该工具不改变临床穿支选择,也不改进手术技术,但提供自主数据处理通路以生成标准化空间路线图。
研究设计与样本
- 回顾性分析2017至2021年间52例接受DIEP皮瓣重建的患者,共分析170条穿支。
- 自研软件通过直方图分析和频率范围滤波(1800-2200 HU)处理轴向CTA切片以增强血管显示。
- 以脐基底为原点(0, 0)计算临床医生所选穿支的笛卡尔坐标,并与人工放射评估比较以验证空间保真度。
主要发现
- 170条皮穿支(n=52)主要集中在下腹部象限。
- 相对脐部,放射评估质心为(1.4, -20.2) mm,软件质心为(1.8, -21.2) mm。
- 验证显示高度一致性,系统偏差仅(-0.4, 1.0) mm,均方根误差6.04 mm,在临床可接受范围内。
- 标准化制图和可视化报告生成平均每例8±6分钟。
临床怎么用
- 可用于将已有CTA穿支数据快速转化为标准化手术规划坐标和可视化报告。
- 有助于优化术前影像工作流,并防范跨科室报告瓶颈对行政时间线的影响。
- 软件不替代临床穿支选择,仅作为数据处理的辅助工具。
局限性
- 原文未报告
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Precise anatomical mapping of the deep inferior epigastric perforator (DIEP) flap is essential for successful breast reconstruction. Although computed tomography angiography (CTA) is the gold standard for preoperative planning, manual identification of perforators is time-consuming and subject to inter-rater variability. We aimed to validate a self-developed image-processing tool designed to standardize coordinate extraction and automate two-dimensional spatial mapping of pre-selected abdominal wall perforators. METHODS: A retrospective analysis was conducted on 52 patients who underwent DIEP flap reconstruction between 2017 and 2021. A total of 170 perforators were analyzed. The custom software processed axial CTA slices through histogram analysis and frequency-range filtering (1800-2200 HU) to enhance vascular visualization. Cartesian coordinates of clinician-selected perforators were calculated relative to the navel base (0, 0) and compared with manual radiological assessments to validate spatial fidelity. RESULTS: Analysis of 170 cutaneous perforators (n=52) showed predominant concentration in the lower abdominal quadrants. Centroids were (1.4, -20.2) mm for radiological assessment and (1.8, -21.2) mm for our software, relative to the umbilicus. Validation demonstrated high concordance, with a minimal systematic bias of (-0.4, 1.0) mm and a root mean square error of 6.04 mm, within clinically acceptable margins. Standardized mapping and visual report generation averaged 8 ± 6 min per patient, thereby providing a rapid turnaround for converting coordinate data into a standardized surgical guide. CONCLUSIONS: The validated tool provides a reliable, objective framework for standardizing and visualizing existing radiological data in DIEP flap planning. Although it does not alter clinical perforator selection or advance surgical technique, this technical utility provides an autonomous data-processing pathway to generate standardized spatial roadmaps, thereby optimizing the preoperative imaging workflow and safeguarding administrative timelines against potential interdepartmental reporting bottlenecks.
引用
- Barrantes S, Lapeña P, Qi P, et al. Development of a software-assisted workflow for transforming CTA-derived perforator information into standardized surgical planning coordinates. J Plast Reconstr Aesthet Surg. 2026. PMID: 42508222. doi:10.1016/j.bjps.2026.07.009
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。