文献速递颅颌面外科显微修复重建

混合现实辅助虚拟手术规划在颅顶重塑中的应用

Mixed reality application of virtual surgical planning for cranial vault remodeling.
PubMed 文献 · J Plast Reconstr Aesthet Surg · 2026-06-11

本研究探索混合现实(MR)叠加虚拟手术规划在颅顶重塑中的可行性。通过Mimics-Materialise院内流程制作患者特异性截骨导板并上传至HoloLens,在3D打印颅骨模型上与工业导板对比。MR导板标记平均差异1.89 mm(SD 1.52 mm),制作时间约1.75 h,结论为整合虚拟规划与术中MR可行且可能具有成本效益。

要点

  • MR导板与商业导板标记平均差异1.89 mm(SD 1.52 mm)。
  • MR导板制作总时间约1.75 h。
  • 整合虚拟规划与术中MR对颅顶重塑可行且可能具成本效益。

核心结论

  • 整合虚拟手术规划与术中混合现实用于颅顶重塑似乎可行且可能具有成本效益。

研究设计与样本

  • 影像通过Mimics-Materialise院内流程处理,虚拟规划截骨并制作患者特异性截骨导板,上传至Microsoft HoloLens。
  • 在解剖精确的3D打印颅骨模型上独立描记MR导板与工业导板,用卡尺测量描记间距以量化准确性。

主要发现

  • 成功完成术前手术规划并开发了MR患者特异性截骨导板以增强可视化。
  • MR导板标记与商业截骨导板相比平均差异为1.89 mm(SD 1.52 mm)。
  • MR导板制作总时间约1.75 h。

临床怎么用

  • 可尝试将虚拟手术规划与术中MR整合用于颅顶重塑,但需进一步优化投影导板在术野中的实时配准精度与可靠性。

局限性

  • 需进一步改进投影导板在术野中更准确、可靠的实时配准。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Mixed reality (MR) overlays interactive three-dimensional virtual content onto the real world and is increasingly being explored for surgical planning and intraoperative guidance. Virtual surgical planning can improve precision and reduce operative time through patient-specific cutting guides and templates; however, evidence supporting their integration in craniofacial surgery remains limited. METHODS: Imaging was processed using an "in-house approach" through Mimics-Materialise. Using virtual surgical planning, we planned the osteotomies and created a patient-specific cutting template, which was then uploaded to Microsoft HoloLens. The MR guide and an industry-made guide were traced independently on an anatomically accurate 3D-printed skull model, and the distance between tracings was measured using calipers to quantify accuracy. RESULTS: We successfully performed preoperative surgical planning and developed a MR patient-specific cutting guide for augmented visualization. The use of MR and 3D-printed guides was compared. MR template markings demonstrated a mean difference of 1.89 mm (SD 1.52 mm) compared to commercial cutting guides, with a total MR template production time of approximately 1.75 h. CONCLUSION: Integrating virtual surgical planning with intraoperative MR appears feasible and potentially cost-effective for cranial vault reconstruction. Further refinement will require more accurate, reliable real-time registration of projected guides in the operative field.

来源:J Plast Reconstr Aesthet Surg,查看原文。版权归原作者所有。

引用

  1. Aronson LN, Borna S, Lewis K, et al. Mixed reality application of virtual surgical planning for cranial vault remodeling. J Plast Reconstr Aesthet Surg. 2026. PMID: 42379084. doi:10.1016/j.bjps.2026.06.002

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。