3D打印手术显微镜:面向全球显微外科教育的低成本创新方案
本文介绍一种为显微外科培训设计的低成本、便携式手术显微镜。该设备通过双镜阵列实现近场立体观察,固定6.5倍放大,可完成2 mm血管端端吻合。样机已在美国、卢旺达、埃塞俄比亚和越南用于培训,作者正继续评估其与传统手术显微镜的效果对比。
要点
- 该3D打印显微镜固定6.5倍放大,可支持2 mm血管端端吻合训练。
- 设备低成本、便携,可使用标准电源或电池供电,适合资源有限环境。
- 样机已在多国用于显微外科培训,效果对比研究仍在进行中。
核心结论
- 该低成本便携式3D打印手术显微镜在不牺牲图像质量的前提下,已开始用于全球显微外科教育培训。
研究设计与样本
- 本研究为新型手术显微镜的技术设计与初步测试报告,样本量未报告。
- 设备通过改良双目物镜和双镜阵列实现近场立体观察,3D打印底盘提供自上而下方向,集成光源支持标准电源或电池供电。
主要发现
- 初始测试显示该显微镜提供固定6.5×放大倍率,受训者可在2 mm血管上完成端端吻合。
- 样机已通过SHARE等组织在美国、卢旺达、埃塞俄比亚和越南部署用于显微外科培训。
关键数值与推荐
- 固定放大倍率为6.5×。
- 受训者可完成端端吻合的血管直径为2 mm。
临床怎么用
- 该设备可作为资源有限环境下显微外科培训的便携替代方案,支持2 mm血管端端吻合练习。
- 作者正在继续评估该显微镜与先进手术显微镜相比的有效性。
局限性
- 作者的研究仍在进行中,与传统手术显微镜的效果对比尚未报告。
- 摘要未报告样本量、定量性能指标或统计比较结果。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Microsurgery is a specialized field within plastic surgery constrained by the high cost and limited availability of surgical microscopes, particularly in resource-limited settings. This lack of access hinders trainees from developing essential microsurgical skills. Previous efforts have explored smartphone-based alternatives, but there remains a need for high-fidelity, accessible training microscopes. This study presents a novel, low-cost, travel-friendly surgical microscope designed for microsurgery training. Modified binocular objective lenses enable near-field stereoscopic viewing using a dual-mirror array. A 3D-printed chassis provides the correct top-down orientation, and an integrated light source operates on standard or battery power, ensuring usability in low-resource environments. Initial testing demonstrated a fixed 6.5× magnification, allowing trainees to perform end-to-end anastomoses on 2-mm vessels. Prototypes were deployed for microsurgery training in the United States, Rwanda, Ethiopia, and Vietnam through the SHARE (Surgeons in Humanitarian Alliance for Reconstruction, Research and Education) plastic surgery organization, Nuoy Reconstructive International, and the senior author's home institution. The authors' investigation continues to assess the effectiveness of the microscope compared with state-of-the-art surgical microscopes. By offering a low-cost, portable solution without compromising image quality, this innovation has begun to transform microsurgical education and operating room-based microscopy worldwide, increasing accessibility for trainees and patients in diverse settings.
引用
- Eftekari SC, Wu EP, Zona EE, et al. The 3D-Printed Surgical Microscope: An Innovative, Low-Cost Solution for Global Microsurgery Education. Plast Reconstr Surg. 2026. PMID: 42340834. doi:10.1097/PRS.0000000000012671
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。