文献速递乳房整形与再造美容整形

高斯泼溅技术测量乳头体积:精度可与现有标准媲美

Advancing nipple volume measurement using Gaussian splatting: Achieving comparable accuracy to current standards.
PubMed 文献 · J Plast Reconstr Aesthet Surg · 2026-02-20

本研究回顾性分析32例女性患者共37个重建乳头,比较高斯泼溅三维重建与传统模具排水法、几何计算及CT、Antera 3D®测量乳头体积的准确性。高斯泼溅法平均误差±0.128 cc,与参考标准差异的95%CI为0.005-0.012 cc,Bland-Altman分析显示与参考标准一致,Antera 3D®一致性界限更窄。结论认为高斯泼溅法提供了一种准确、低成本、非接触且患者友好的替代方法。

要点

  • 高斯泼溅法测量乳头体积平均误差±0.128 cc,与参考标准差异的95%CI为0.005-0.012 cc。
  • Bland-Altman分析证实高斯泼溅法与参考标准一致,但Antera 3D®一致性界限更窄。
  • 高斯泼溅法为非接触、低成本、患者友好的乳头体积测量替代方案。

核心结论

  • 高斯泼溅法可准确测量重建乳头体积,与现有标准一致性可接受,且低成本、非接触、患者友好。

研究设计与样本

  • 回顾性分析2023年12月1日至2025年5月30日期间在忠南大学医院评估的32例女性患者(年龄>19岁)共37个重建乳头。

主要发现

  • 高斯泼溅法平均误差±0.128 cc,Antera 3D®平均误差±0.023 cc。
  • 两种方法差异的95%CI为0.005-0.012 cc,在可接受范围内。
  • Bland-Altman分析显示两种方法与参考标准一致,Antera 3D®一致性界限更窄。

关键数值与推荐

  • 传统测量方法包括基于阿基米德原理的模具排水法和基于物理尺寸的几何计算,作为参考标准。
  • CT和Antera 3D®作为较新的测量方式;本研究引入高斯泼溅三维重建法。

临床怎么用

  • 高斯泼溅法可作为传统乳头体积测量技术的准确、低成本、非接触且患者友好的替代方案。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The rising incidence of breast cancer and increasing demand for esthetic breast reconstruction have led to a higher frequency of nipple reconstruction procedures. Methods for nipple reconstruction vary; however, the assessment of surgical outcomes through nipple volume measurement often relies on imprecise or inconsistent techniques. Conventional approaches can be time-consuming, uncomfortable for patients, and depend on expensive equipment. METHODS: We retrospectively analyzed 37 reconstructed nipples in 32 female patients aged >19 years who underwent evaluation at Chungnam National University Hospital between December 1, 2023, and May 30, 2025. Traditional measurement methods include mold-based water displacement using Archimedes' principle, and geometric calculations based on physical dimensions that serve as the reference standard. Computed tomography (CT) and Antera 3D®, two more recent modalities, were also used. In this study, we introduced a novel, noninvasive three-dimensional (3D) reconstruction method using the Gaussian splatting technique. RESULTS: The proposed method demonstrated a mean squared error of ±0.128 cc compared with ±0.023 cc for Antera 3D®. The 95% confidence interval for the difference between the methods (0.005-0.012 cc) remained within acceptable limits. Bland-Altman analysis confirmed agreement between both methods and the reference standard, with Antera 3D® showing narrower limits of agreement. CONCLUSION: The proposed Gaussian splatting method provides an accurate, low-cost, non-contact, and patient-friendly alternative to conventional nipple volume measurement techniques.

来源:J Plast Reconstr Aesthet Surg,查看原文。版权归原作者所有。

引用

  1. Kim D, Oh SK, Heo J, et al. Advancing nipple volume measurement using Gaussian splatting: Achieving comparable accuracy to current standards. J Plast Reconstr Aesthet Surg. 2026. PMID: 41797199. doi:10.1016/j.bjps.2026.02.046

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。