高保真低成本显微血管训练夹:拓展显微外科培训机会
该研究开发了一种用18-8不锈钢片和3D打印压接工具自制低成本显微血管夹的可重复工艺,将其与标准Acland夹对比,发现两者施加力无显著差异,训练夹可阻断高达160 mm Hg的流动,成本仅4.13美元。
要点
- 自制训练夹与Acland夹施加力无显著差异,可阻断血流至160 mm Hg。
- 单夹成本4.13美元,Acland夹约50美元,折叠时间略低于5分钟。
- 焦点小组认为训练夹在操作、易用性和手感上与Acland夹无显著差异。
核心结论
- 用单张不锈钢片和压接工具可制成可重复设计、低成本、高保真的单夹和双对置显微血管夹,供资源有限环境中的显微外科医生制造。
研究设计与样本
- 使用18-8不锈钢片,激光切割模板,结合尖嘴钳和定制3D打印压接工具折叠成型。
- 用恒压模拟器和力敏电阻比较训练夹与标准Acland夹的阻流能力和施加力。
- 对整形外科住院医师焦点小组进行保真度问卷调查。
主要发现
- 训练夹与常规Acland夹施加的力无显著差异。
- 训练夹能持续阻断高达160 mm Hg的流动。
- 焦点小组发现两种产品在设备操作、易用性或手感方面无显著差异。
- 每个训练夹制作成本为4.13美元,而Acland夹从制造商购买约需50美元。
- 平均折叠时间略低于5分钟。
临床怎么用
- 显微血管夹可由显微外科医生在资源有限环境中自行制造,以改善全球显微外科培训与教育的机会。
- 所用不锈钢可耐受常规灭菌方法,并预计具有长期耐用性。
局限性
- 需进一步研究以确定在人群中使用时的安全性和器械寿命。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: One significant barrier to training and supporting microvascular surgeons is the cost of obtaining high-quality equipment, particularly in resource-limited environments. Currently available synthetic solutions lack the durability to allow for resterilization with limited long-term durability. The authors aimed to develop and describe a reproducible process of creating low-cost, high-fidelity microvascular clamps that can be self-manufactured to improve access to microsurgical training and education worldwide. METHODS: Using 18-8 stainless steel sheets, templates were cut using a laser cutter (Fig. 1). Using a combination of needle nose pliers and a custom 3D-printed crimping tool, the template was folded on itself to fashion the micro clamp (Figs. 2, 3). The training clamps were then compared to standard Acland clamps using a constant pressure simulator and a force sensitive resistor to determine ability to impede flow as well as to ensure no excess force was applied to create trauma on the vessels. A cost analysis between conventional Acland microvascular clamps and training clamps was performed. A fidelity questionnaire was administered to a focus group of plastic surgery residents to assess training clamp performance relative to standard Acland clamps. RESULTS: No significant differences were found between the force applied from conventional Acland clamps and the training clamps. Training clamps were consistently able to occlude flow up to 160 mm Hg. The focus group found no significant differences in device handling, ease of use, or feel between the products. The cost to create each training clamp was $4.13, whereas Acland clamps cost ~$50 to purchase from the manufacturer. The average folding time was just under 5 minutes. CONCLUSIONS: Using a single sheet of stainless steel and a crimping tool, single and double-opposing microvascular clamps can be created with reproducible design that is low cost, with high-fidelity, and can be manufactured by microvascular surgeons in resource-limited environments. Supplies can easily be shipped around the world and assembled. The stainless steel used to create these clamps is amenable to conventional sterilization methods and projected long-term durability. Further study is required to determine safety and device longevity for use in human populations.
引用
- Leach GA, Dorobek T, Alsobrooks S, et al. High-Fidelity, Low-Cost Microvascular Training Clamps: Expanding Training Opportunities for Microsurgery. Ann Plast Surg. 2025. PMID: 40310001. doi:10.1097/SAP.0000000000004276
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。