一种使用3D打印创面框架研究啮齿动物无血管结构外露创面愈合的模型
研究在Lewis大鼠背部制作20×20 mm全层创面,固定不同尺寸0.5 mm厚硅胶片模拟无血管结构,并用3D打印创面框架隔离创面环境,评估皮片和游离皮瓣存活及硅胶片外露情况,随访4周。结果显示皮片覆盖硅胶片部分逐渐坏死,硅胶片面积缩小至创面表面积50%以下时4周时存活部分增加,游离皮瓣可完全覆盖硅胶片。
要点
- 3D打印创面框架可维持创面尺寸并隔离创面环境长达4周。
- 皮片无法完全覆盖逐渐增大的无血管结构,覆盖硅胶片部分发生逐渐坏死。
- 游离皮瓣能对硅胶片提供完全且存活的覆盖。
核心结论
- 开发了一种新型啮齿动物创面愈合模型,可维持相同创面尺寸并隔离创面环境长达4周。
- 皮片未能完全覆盖逐渐增大的无血管结构,而游离皮瓣能够提供存活覆盖。
研究设计与样本
- 在Lewis大鼠背部制作20×20 mm全层创面,将不同尺寸的0.5 mm厚硅胶片固定于创面床。
- 设计3D打印创面框架以隔离创面环境,评估皮片和游离皮瓣存活及硅胶片外露情况。
- 大鼠随访4周,每周更换敷料并拍照,终点取材进行组织活力和组织学分析。
主要发现
- 所有组整个实验期间总创面表面积保持恒定,创面框架耐受良好。
- 皮片中无硅胶片下方部分与筋膜整合,组织学显示表皮完整。
- 皮片覆盖硅胶片部分发生逐渐坏死,且随硅胶片尺寸不同而异。
- 当硅胶片尺寸缩小至创面表面积的50%以下时,4周时点覆盖硅胶片部分的存活比例增加。
- 游离皮瓣对硅胶片提供完全覆盖。
临床怎么用
- 该模型与创面床存在无血管结构的复杂创面临床相关,可作为低成本、易重复的平台评估更复杂的生物工程创面覆盖方案。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Soft tissue defects with exposed avascular structures require reconstruction with well-vascularized tissues. Extensive research is ongoing to explore tissue engineered products that provide durable coverage. However, there is a lack of controlled and affordable testbeds in the preclinical setting to reflect this challenging clinical scenario. We aimed to address this gap in the literature and develop a feasible and easily reproducible model in rodents that reflects an avascular structure in the wound bed. METHODS: We created 20 × 20 mm full thickness wounds on the dorsal skin of Lewis rats and secured 0.5-mm-thick silicone sheets of varying sizes to the wound bed. A 3D-printed wound frame was designed to isolate the wound environment. Skin graft and free flap survival along with exposure of the underlying silicone was assessed. Rats were followed for 4 weeks with weekly dressing changes and photography. Samples were retrieved at the endpoint for tissue viability and histologic analysis. RESULTS: The total wound surface area was constant throughout the duration of the experiment in all groups and the wound frames were well tolerated. The portion of the skin graft without underlying silicone demonstrated integration with the underlying fascia and a histologically intact epidermis. Gradual necrosis of the portion of the skin graft overlying the silicone sheet was observed with varying sizes of the silicone sheet. When the size of the silicone sheet was reduced from 50% of the wound surface area, the portion surviving over the silicone sheet increased at the 4-week timepoint. The free flap provided complete coverage over the silicone sheet. CONCLUSION: We developed a novel model of rodent wound healing to maintain the same wound size and isolate the wound environment for up to 4 weeks. This model is clinically relevant to a complex wound with an avascular structure in the wound bed. Skin grafts failed to completely cover increasing sizes of the avascular structure, whereas the free flap was able to provide viable coverage. This cost-effective model will establish an easily reproducible platform to evaluate more complex bioengineered wound coverage solutions.
引用
- Bengur FB, Komatsu C, Loder S, et al. A Model to Study Wound Healing Over Exposed Avascular Structures in Rodents With a 3D-Printed Wound Frame. Ann Plast Surg. 2024. PMID: 38394271. doi:10.1097/SAP.0000000000003829
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。