文献速递美容整形

鼻整形术的三维(3D)面积与体积测量

Three-dimensional (3D) area and volume measurements for rhinoplasty.
PubMed 文献 · J Plast Reconstr Aesthet Surg · 2023-05-02

本研究在通用面部3D模型上,用Blender软件将鼻部变形为七种不同畸形鼻,并基于文献常用标志点界定鼻尖、鼻背、鼻根等区域,进行面积与体积测量。结果显示每种畸形鼻均呈现显著的面积与体积差异,例如与GF-Pleasant鼻相比,GF-Snub鼻鼻尖面积减少43.3%;体积测量大多与面积测量平行,但存在一些不一致。作者认为可可靠地开发出用于3D扫描图像的新面积与体积测量方法。

要点

  • 在通用面部3D模型上变形生成七种畸形鼻并进行面积与体积测量。
  • GF-Snub鼻较GF-Pleasant鼻鼻尖面积减少43.3%。
  • 体积测量大多与面积测量平行,但存在一些不一致。

核心结论

  • 作者认为可可靠地开发出用于3D扫描图像的新面积与体积测量方法,这些测量可用于丰富面部分析及鼻整形术效果评估。

研究设计与样本

  • 研究在通用面部(GF)3D模型上进行,使用免费开源3D建模软件Blender将模型鼻部变形,生成七种不同畸形鼻并完成面积与体积测量。

主要发现

  • 每种不同畸形类型的鼻均显示出显著的面积与体积差异。
  • 与GF-Pleasant鼻相比,GF-Snub鼻在鼻尖处面积减少43.3%。
  • 体积测量大多与面积测量平行,但记录到一些不一致。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Morphometric changes achieved in rhinoplasty are mostly analyzed on two-dimensional (2D) images. However, most of these alterations are amenable to three-dimensional (3D) analysis. OBJECTIVES: Objective measurements for rhinoplasty are currently done on 2D photographic analyses. We believe that newer techniques will develop. This is a study to help define new parameters. METHODS: Landmarks that are widely used in the literature were used to define the boundaries of these measurements. They comprised certain parts of the nose (tip, dorsum, radix, etc.). Measurements were done on a generic face (GF) 3D model. The model's nose was then morphed using the free, open-source 3D modeling software (Blender) to generate seven different deformed noses and to perform the area and volume measurements. RESULTS: Each nose with a different type of deformity demonstrated significant area and volume differences. For example, comparing area measurements to GF-Pleasant nose, GF-Snub nose showed a significant difference at the tip (43.3% reduction). Volume measurements were found to be mostly parallel to the area measurements; however, some incongruences were noted. CONCLUSIONS: We show that new area and volume measurements can be reliably developed for 3D-scanned images. These measurements can be utilized and will enrich the facial analysis and evaluation of the outcomes of rhinoplasty.

来源:J Plast Reconstr Aesthet Surg,查看原文。版权归原作者所有。

引用

  1. Celikoyar MM, Topsakal O, Sawyer P, et al. Three-dimensional (3D) area and volume measurements for rhinoplasty. J Plast Reconstr Aesthet Surg. 2023. PMID: 37279631. doi:10.1016/j.bjps.2023.04.082

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。