文献速递烧伤

沙漠气候下日照暴露表面的温度特征:确定路面烧伤风险

Temperature Profiles of Sunlight-Exposed Surfaces in a Desert Climate: Determining the Risk for Pavement Burns.
PubMed 文献 · J Burn Care Res · 2023-01-01

日照暴露多孔岩石最高达170°F,沥青166°F,砖152°F,混凝土144°F,金属144°F,沙143°F,出现在2020年8月6日下午2:10,当时环境温度120°F、太阳辐照度940 W/m²。日照暴露材料比同时刻遮阴材料高36至56°F。

要点

  • 日照暴露多孔岩石最高温170°F,沥青166°F,砖152°F,混凝土144°F,金属144°F,沙143°F。
  • 最高温出现在2020年8月6日下午2:10,环境温度120°F,太阳辐照度940 W/m²。
  • 日照暴露材料温度比同时刻遮阴材料高36至56°F,日最高温出现在下午2:00至4:00。

核心结论

  • 沙漠气候下日照暴露表面温度数据可用于告知公众接触烧伤风险。

主要发现

  • 日照暴露多孔岩石最高170°F,沥青166°F,砖152°F,混凝土144°F,金属144°F,沙143°F,测量于2020年8月6日下午2:10,环境温度120°F,太阳辐照度940 W/m²。
  • 日照暴露材料比同时刻遮阴材料高36至56°F。
  • 日最高温度出现在下午2:00至4:00,归因于最大太阳辐照度。
  • 为所有测试材料创建了表面温度随太阳辐照度和一天中时间变化的等高线图。
  • 创建了计算流体动力学模型以验证数据并作为基于温度和日照输入的预测模型。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Plentiful sunlight and high temperatures in desert climates cause burn injuries from contact with sun-exposed surfaces. The peak temperature, times, and surfaces of greatest risk are not well described. This work recorded temperature measurements of six materials in a desert climate. Surface temperatures of asphalt, brick, concrete, sand, porous rock, and galvanized metal were measured throughout the summer, along with ambient temperature, and sunlight intensity. Samples were placed in both shade and direct sunlight for evaluation of sunlight effect. Seventy-five thousand individual measurements were obtained from March to August 2020. Maximum recorded temperatures for sunlight-exposed porous rock were 170°F, asphalt 166°F, brick 152°F, concrete 144°F, metal 144°F, and sand 143°F, measured on August 6, 2020 at 2:10 pm, when ambient temperature was 120°F and solar irradiation 940 W/m2. Sunlight-exposed materials ranged 36 to 56°F higher than shaded materials measured at the same time. The highest daily temperatures were achieved between 2:00 and 4:00 pm due to maximum solar irradiance. Contour plots of surface temperature as a function of both solar irradiation and time of day were created for all materials tested. A computational fluid dynamics model was created to validate the data and serve as a predictive model based upon temperature and sunlight inputs. This information is useful to inform the public of the risks of contact burn due to sunlight-exposed surfaces in a desert climate.

来源:J Burn Care Res,查看原文。版权归原作者所有。

引用

  1. Chestovich PJ, Saroukhanoff RZ, Moujaes SF, et al. Temperature Profiles of Sunlight-Exposed Surfaces in a Desert Climate: Determining the Risk for Pavement Burns. J Burn Care Res. 2023. PMID: 36161490. doi:10.1093/jbcr/irac136

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。